1. Catalogs
  2. PERFINOR
  3. FACADE MIWO SANDWICH PANEL

FACADE MIWO SANDWICH PANEL

FACADE MIWO SANDWICH PANEL

Product catalog summary
Facade Panel Geometry: The document details the specifications of MIWO Sandwich Panels used for facades. These panels come in various thicknesses: 40, 50, 60, 80, and 100 mm. The weight per square meter ranges from 11.56 kg/m² to 17.37 kg/m² depending on the thickness.
Thermal Transmittance: The thermal transmittance values for roofs range from 0.970 W/m²·K to 0.358 W/m²·K, and for facades from 0.948 W/m²·K to 0.354 W/m²·K, improving with increased thickness.
Fire and Acoustic Properties: The panels comply with fire reaction standards UNE-EN 13.501-1 A2-s1,d0 and UNE-EN 13.501-2, offering fire resistance ratings of EI 30 to EI 180. They are non-hydrophilic and provide acoustic insulation without promoting corrosion or bacterial growth.
Structural Specifications: The document provides span and overload data for different panel thicknesses, indicating their structural capabilities under various conditions. Calculations are based on S220GD steel with a deflection limit of L/200 and a nominal sheet thickness of 0.5 mm.
Product Features: The Perfinor facade solution features panels with non-visible fastening screws, available in various finishes and materials such as steel and aluminum. They comply with the UNE EN-14509 standard, offering customizable solutions in terms of coatings, colors, and widths.
Contact Information: The panels are manufactured by Perfinor, located in Caborana, Asturias, Spain. Contact can be made via email at [email protected] or phone at +34 985 48 13 48.
See more

Catalog excerpts

FACADE MIWO SANDWICH PANEL-1

MIWO SANDWICH PANEL FACADE MINERAL WOOL (MIWO) FACADE Thickness Weight Thermal transmittance (1) Reaction to fire Values for nominal sheet thicknesses 0.5 mm -0.5 mm and panel width of 1 m. (2) MINERAL WOOL / Check available certificates Fire: A2-s1,d0 | Water: non-hydrophilic | Acoustic | It neither causes nor favors the corrosion of materials. It does not promote bacterial development The Perfinor facade solution is a panel with non-visible fastening screws that could be made with various finishes (micro-perforated, semi-smooth, and smooth), combined with the different possibilities of: materials (Steel and Aluminum); grades of coatings, colors and widths, it allows adapted solutions for each project OVERLOAD [kg/m2] FACADE MIWO SPAN [m] 3 Product compliant with UNE EN-14509 standard. Calculations for S220GD steel; Deflection limit L/200; nominal sheet thickness 0,5-0,5 Caborana industrial estate, plots 1 to 13 36 6 8 4 C abor ana (Aller municipality) – A s turia s (Spain) Email: per finor@per finor.com – Phone: +34 985 48 13 48

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.