TOTAL STATION TI Asahi Co., Ltd. International Sales Department 4-3-4 Ueno Iwatsuki-Ku, Saitama-Shi Saitama, 339-0073 Japan Tel.: +81-48-793-0118 Fax. +81-48-793-0128 E-mail: [email protected] www.pentaxsurveying.com/en/

Before using this product, be sure that you have thoroughly read and understood this instruction manual to ensure proper operation. After reading this manual, be sure to keep in a convenient place for easy reference. This Quick Reference Guide explains about the essential ways of handling the hardware of the W-800 series and cautions required in handling it. For further detailed information on the W-800 series, please refer to Basic Instruction Manual contained in the CD supplied with the instrument. For the operations of application software, please refer to their respective manuals. Copyright...

PRECAUTIONS REGARDING SAFETY Safety Precautions (Must be followed) The following items are intended to prevent possible injury to the user or other people and/or damage to the instrument before it occurs. These safety precautions are important to the safe operation of this product and should be observed at all times. Distinctive Displays The following displays are used to distinguish precautions by the degree of injury or damage that may result if the precaution is ignored. WARNING Items indicated by this display are precautions which, if ignored, would result in serious injury. CAUTION Items...

WARNING Do not stare into the laser beam directly as this may result in damage to your eyes. W-800 is a Class IIIa (3R) Laser product. Do not look into the laser radiation aperture directly as this may result in damage to your eyes. Never use the telescope to view intense light such as direct sunlight or sunlight reflected through a prism as this may result in loss of sight. Do not disassemble, modify or repair this product as there a risk of laser radiation. Do not aim the laser beam at a person as it is harmful to the eyes and body. Receive the examination treatment by the doctor when the eyesight...

CAUTION For your safety, perform the initial and periodical inspection as well as when the instrument is fixed and adjusted. When the laser beam enters eyes, an unexpected accident might be caused by blink of eyes. Do not place the laser product at a height where its laser beam may hit the eyes of car drivers and pedestrians. Do not place the laser product at a place where its laser beam may hit a reflecting object such as a mirror or a glass window.The reflection beam of the laser is also harmful to the human body. When not performing measurement, cut off the power supply or shade the Objective...

[Usage precautions] Surveying instruments are high-precision instruments. In order to assure that the Electronic Total Station W-800 series product which you have purchased will provide long-lasting maximum performance, the precautions in this manual must be followed. Be sure to follow these instructions and use this product properly at all times. [Solar observation] WARNING Never view the sun directly using the telescope as this may result in loss of sight. Never point the objective lens directly at the sun as this may damage internal components. When using the instrument for solar observation,...

• There is a possibility that the instrument may not be able to correctly calculate out the distance when receiving reflected laser beam from a man or a car that comes and goes in front of the target. • There is a possibility that the distance may not be correctly measured when measuring a target in the direction where there is a reflecting object (mirror, stainless board and white wall, etc.) or under too strong sun light. • In a situation high accuracy may not be expected, perform the measurement by reflector sheet or prism. • The measurement range at TRACK mode is over 5m. • It may take longer...

[Interface] Do not insert or remove SD card, CF card and USB Connector outdoors. Be careful not to let dust, mud, sand, water, harmful gas or salty steam enter the card slot or USB connector port. Be sure to turn the instrument’s power off before inserting or removing the SD card, CF card or USB Connector. [Touch panel] Use the Stylus pen when you touch the panel for operation of software. Do not touch the panel with any things such as fingertips or pen point as this may scratch and damage the screen. [Data saving] When using application software, store data in SD card drive, CF card drive or...

[Transporting and carrying the instrument] • Be careful to protect this instrument from shock of impact and excessive vibration which may result in damage during transportation and shipment. • When transporting the instrument, always put it in the case and wrap shockabsorbing material around it and be sure it is handled as “FRAGILE” . [Checks and repairs] • Always check the instrument before beginning work and check that the instrument is maintaining the proper level of precision. Pentax bears absolutely no responsibility for damages due to survey results obtained from surveys conducted without...

PRECAUTIONS REGARDING SAFETY 1 SAFETY PRECAUTIONS(MUST BE FOLLOWED) 1 1. BEFORE USING THE INSTRUMENT 9 1.2 ATTACHING AND CHARGING THE BATTERY 10 2.4 LASER PLUMMET, LASER POINTER 15 5. NOTICE TO THE USER OF THIS PRODUCT 21

1. BEFORE USING THE INSTRUMENT 1.1 Names of parts Top handle Focus ring Eyepiece ring Instrument height mark Battery latch Laser indicator Battery pack Circulator vial Telescope tangent screw Telescope clamp screw Display panel Clamp screw Tangent screw Leveling screw USB connector Base plate Detaching knob Objective lens A shift fixed screw is attached to Base plate of a shift base type model.

1.2 Attaching and charging the battery [Removing the Battery] Å Turn the Battery latch anticlockwise and remove the battery pack. Ç Lift up the battery pack and remove it from the instrument. • Be absolutely sure to turn the power off when removing the battery pack as removing the battery pack while the power is still on may result in damage to the instrument. [Attaching the battery] Å Align the guide grooves on the battery pack with the guide grooves on the instrument and push the top of the battery pack into place. Ç Turn the Battery latch clockwise to fix. • Turn and fix the Battery latch...