IP110 Series Camclosure ® Network Camera System
4Pages

{{requestButtons}}

Catalog excerpts

IP110 Series Camclosure ® Network Camera System - 1

PRODUCT SPECIFICATION camera solutions C3432 / REVISED 3-25-09 International Standards Organization Registered Firm; ISO 9001 Quality System IP110 Series Camclosure ® Network Camera System INDOOR/OUTDOOR, NETWORK MINI DOME, SURFACE MOUNT Product Features • Power over Ethernet (IEEE802.3af) or 24 VAC Power Input • Open Architecture • 3 Simultaneous Video Streams – Dual MPEG-4: 30 images per second (ips) – Scalable MJPEG • Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, NTP • Multilevel Password Protection • Weatherproof, Puncture Proof Bubble; Tamper-Resistant Hardware • 8 Camera and Lens Options for Low Light Sensitivity, Extreme Lighting, and Ultra High Resolution – Day/Night Wide Dynamic Range (WDR) – Day/Night High Resolution – Color WDR – Color High Resolution • Includes Video Service Connector for On-Site Setup • Alarm Input and Output • Thermostatically Controlled Heaters • Progressive Scan • Motion Detection • Up to 30 ips at 704 x 480 or 704 x 576 Resolution The IP110 Series Camclosure ® is an indoor/outdoor, fixed mini dome system with a built-in 100Base-TX network interface for live streaming to a standard Web browser (Microsoft ® Internet Explorer ® or Mozilla ® FireFox ® ). The network mini dome features open architecture connectivity for third-party software recording solutions and is also Endura Enabled ™ to record, manage, configure, and view multiple live streams. When connected to an Endura ® network-based video security system, the mini dome has access to EnduraStor ™ and EnduraView ™ for optimized image quality and bandwidth efficiency. EnduraStor dramatically extends the recording duration at a lower frame rate, and EnduraView constantly monitors and automatically adjusts the system for the best picture possible. The IP110 Series Camclosure supports Pelco camera application programming interface (API) for customized software solutions, giving users the flexibility to use third-party products. The IP110 Series Camclosure has built-in Power over Ethernet (PoE) IEEE802.3af, which supplies power to the camera using the network, eliminating the need for a separate power supply and reducing the cost of installation. For installation flexibility the unit is also prewired for 24 VAC locally. The IP110 Series Camclosure is perfect for a variety of indoor and outdoor applications, and its versatile design allows for multiple mounting options. It can be installed directly to a ceiling or wall. It can also be installed to a 1.5-inch (3.81 mm) NPT fitting with the optional pendant mount adapter (IP110-P). The unit can also mount directly to a 4S electrical box using the optional adapter plate (ICS110-AP) or a standard plaster ring. IP110 WEB BROWSER 3rd PARTY INTEGRATION INTERNET ENDURA SYSTEM IMPORTANT NOTE. PLEASE READ. The network implementation is shown as a general representation only and is not intended to show a detailed network topology. Your actual network will differ, requiring changes or perhaps additional network equipment to accommodate the system as illustrated. Please contact your local Pelco Representative to discuss your specific requirements.

Open the catalog to page 1
IP110 Series Camclosure ® Network Camera System - 2

TECHNICAL SPECIFICATIONS GENERAL Construction Aluminum with steel camera mounting bracket and polycarbonate dome Impact IP110 is a rugged product that exceeds an IK10++ rating of Standard EN62262 and can withstand up to 100J in a vertical impact Finish Light gray polyester powder coat Light Attenuation Smoked f/1.5 light loss Clear Zero light loss Unit Weight 2.20 lb (1.00 kg) Shipping Weight 4.00 lb (1.81 kg) ELECTRICAL Ports RJ-45 connector for 100Base-TX Auto MDI/MDI-X Autonegotiate/Manual setting Cabling Type Cat5 or better for 100Base-TX Input Voltage 24 VAC (18-36) or PoE (IEEE802.3...

Open the catalog to page 2
IP110 Series Camclosure ® Network Camera System - 3

TECHNICAL SPECIFICATIONS CAMERA SPECIFICATIONS LENS SPECIFICATIONS *Focal length specifications presume a 10% horizontal and 4% vertical monitor overscan. Day/Night Wide Dynamic Range Varifocal, Auto Iris (DW Series) Day/Night High Resolution Varifocal, Auto Iris (DN Series) Wide Dynamic Range Varifocal, Auto Iris (CW Series) High Resolution Varifocal, Auto Iris (CH Series) Imaging Device Picture Elements NTSC PAL 1/3-inch pixel based imager 720 (H) x 540 (V) 720 (H) x 540 (V) 1/3-inch interline color CCD 768 (H) x 494 (V) 752 (H) x 582 (V) 1/3-inch pixel based imager 720 (H) x 540 (V) 720...

Open the catalog to page 3
IP110 Series Camclosure ® Network Camera System - 4

Pelco, Inc. Worldwide Headquarters: 3500 Pelco Way, Clovis, California 93612-5699 USA USA & Canada Tel (800) 289-9100 • FAX (800) 289-9150 International Tel +1 (559) 292-1981 • FAX +1 (559) 348-1120 www.pelco.com SYSTEM MODELS AND ACCESSORIES MODEL NUMBERS IP110-ENC IP110 Series surface mount enclosure (no camera/lens) IP110-LD IP110 Series smoked bubble IP111-LD IP110 Series clear bubble with liner When ordering an IP110 Series surface mount dome with no camera or lens, please order one enclosure and one bubble. SYSTEM NUMBERS RECOMMENDED POWER SUPPLIES POE20U560G Single port PoE injector...

Open the catalog to page 4

All PELCO catalogs and technical brochures

  1. Sarix® IME

    3 Pages

  2. PMCL600K

    3 Pages

  3. Sarix® IMP

    6 Pages

Archived catalogs