CM9765 Series Matrix
4Pages

PRODUCT SPECIFICATION analog systems and controls CM9765 Series Matrix MICROPROCESSOR-BASED SWITCHER/CONTROLLER, 2,048 INPUTS, 512 OUTPUTS Product Features • Microprocessor-Based, Full Cross-Point Video Matrix • High-Density Architecture Supports up to 256 Cameras and 16 Monitors in Each Bay • Control up to 2,048 Cameras and 512 Monitors in a Single Node or Expand Camera Capacity with a Multi-Node System (up to 24 Nodes). • Full System Reports From CM9700-MGR Provide System Wiring and Conguration Details • Sixteen RS-422 COM Ports (Expandable to 120) and Two RS-232 Full-Duplex Ports Available on the CPU • System Diagnostic LEDs Displayed on Front Panel • Flash Technology Eases System Maintenance and Upgrades • Logical Camera Selection and Priority Level Operation • Multiplexer and DVR Control Using the Keyboard The 9765 System is a full-featured video matrix switching control system that allows users to view and control up to 2,048 cameras and 512 monitors on a single node. Up to 96 individual user-dened ID numbers can be assigned to allow or deny access to system functions. • Built-in Video Loss Detection • Windows®-Based System Management Software (Windows 2000, Windows XP) Includes Multilangual Menus and On-Screen Help • Factory Tested Prepackaged Systems • ASCII Data Input to Interface Access Control and Other External Computer-Based Systems • Powerful Macro Programming Optional Accessories • “Hot Switch” and Backup CPU Ensure Uninterrupted Operation • Redundant Power Supplies for Switching Bays • Coaxitron® Translator Allows PTZ Communication Over Standard Coaxial Cable • Responds to 5,000 Alarms • Network Interface Unit Allows Multiple Systems to Share Video and Control • DVR Management The base conguration for the 9765 System is made up of a central processing unit (CC1), matrix switching bay(s) (MXBs) with video input/output modules, and keyboard controllers (KBDs). Optional components can be added to enhance system capabilities. Precongured, prepackaged systems make installation fast and simple. The 9765 System features a user-friendly Windows ®-based management system, which allows for easy system programming and maintenance. Macros allow activation of events based on schedule or alarm. Macros may call system-wide sequences (tours); activate preset positions on properly equipped cameras; and activate external relays to control auxiliary functions such as locking doors (additional equipment may be required). The 9765 System also includes built-in video loss detection and system diagnostic features, indicated by LEDs on the front panel of the matrix bay. Flash technology incorporated into the system design allows for easier system maintenance and upgrades. Optional DVR management allows DVRs to be controlled directly from the system keyboards. Suitable DVRs can be monitored for operational conditions ensuring continuous recording. All CM9765 Series systems require installation by a Pelco Certied Dealer/ Installer. This specication sheet may be used for purpose of information only and does not constitute approval or certication of receiving party. Proof of certication must be provided prior to shipment of CM9765 Systems contained herein. International Standards Organization Registered Firm; ISO 9001 Quality System

SYSTEM COMPONENTS/TECHNICAL SPECIFICATIONS CENTRAL PROCESSING UNIT (CC1) Diagnostric Monitor Output 1 VGA I/O Ports 16 RS-422 ports (expandable to 32); total system capability is 120 ports* 2 RS-232 ports 1 parallel printer port 1 VGA output port 2 PC-AT compatible keyboard ports The central processing unit communicates with external devices and accepts commands from external computers, keyboards, graphical user interfaces (GUIs), access control systems, casino data systems, programmable logic controllers (PLCs), and lighting and intercom systems. An internal VGA card is included for...

SYSTEM COMPONENTS AND ACCESSORIES MODELS CONTROLLER CM9700-CC1 CM9700-SER OPTIONAL COMPONENTS The following components are compatible with the 9765 System: CPU controller; operates on 120 VAC, 60 Hz or 230 VAC, 50 Hz. (4 RUs). Serial communication card (RS-422 SERCOM) provides eight communications ports to interface peripheral equipment (4 maximum per CPU). Port expansion unit; 32 serial communication (SERCOM) ports per unit. Up to three units can be added to a CC1 (contact Pelco’s System Applications Department before adding to an existing CM9700-CC1). Includes interconnecting cables and...

SYSTEM COMPONENTS AND ACCESSORIES MISCELLANEOUS Alarm interface unit; connects directly to each system; each unit can monitor up to 64 alarms and up to four units can be connected in a series from one SERCOM port. (1 RU). Code distribution unit; 16-channel RS-422 transmit only (two data wires and ground) distributor. Primarily used for wiring up to 16 pan/tilt/zoom receivers in a “star” conguration. (1 RU). Coaxitron translator; generates Coaxitron signals for Pelco Coaxitron receivers; each translator supports up to 16 receivers. (1 RU). Data merger and port expander unit; this unit allows...