PRIMAIRE TOLEDO Primer coating for concrete surfaces coated with TOLEDO systems and cold plastic coatings MARQUAGE ROUTIER MARQUAGE URBAIN MARQUAGE AMENAGEMENT MARQUAGE INDUSTRIEL Classement AFNOR NFT 36 005 Famille IV Classe 4a DEFINITION Primer coating for concrete before the application of TOLEDO system or two-component methacrylic-based, colourless and solvent free coatings. DESTINATION Primer coating for concrete which must be coated over with a two component methacrylic-based as : - public area - parking lots DUREE DE VIE FONCTIONNELLE Dosage Séchage : 400 g/m², depending on the sand depht of the surface. : 1 hour at 20°C. PROPRIETES PRIMAIRE TOLEDO : - prevents absorbance differences, - provides cohesion to the concrete, - in-depth plugging of concrete porosity, - is compatible with all two-component methacrylic-based cold plastic of the range BANDAX ENDUIT TEINTES, TOLEDO TEINTES, AXION OSLO, etc... - enables consistent drying of the finish coating DONNEES TECHNIQUES Masse volumique Conservation Teinte Dilution Diluant de nettoyage Durée de vie du mélange (à 20°C) : 1 +/- 0.05 g/m³ : 6 months in its unaltered and sealed original container : Colourless : Thinner 258 : Thinner EST : 5 min at 20°C. Pour toute autre information, visitez notre site internet : www.maestria.fr Contact : [email protected]

PRIMAIRE TOLEDO Primer coating for concrete surfaces coated with TOLEDO systems and cold plastic coatings APPLICATION PREPARATION DE SURFACE CONCRETE In compliance with recommendation set forth in DTU 59-3 concerning the preparation and quality of flooring before painting operations: dry surface, clean, free from any form of pollutant, no rising damp and showing sufficient roughness to enable the coating to adhere. The concrete surface must be at least three weeks old prior to application. CONDITIONS D'APPLICATION Surface temperature: Between 5°C and 40°C and at least 3°C higher than the dew...