BIOTANK Solvent free epoxy paint, airless "cold spray" DEFINITION Solvent free epoxy paint, low viscosity and strong gel lap, enabling the application of thick inert coats of paint, resistant to abrasion. Suitable for use in contact with drinkable water or with pulverulent food such as cereal, starch, flour, fresh or dry fruit, sugar, frozen foods. INTENDED USES - Maintenance and repair of water towers. - Protection of any part of a structure for use the storage and distribution of drinkable water. - Inside coating of silos, tanks, cisterns, or any device pulverulent food transport. PRINCIPAL CARACTERISTICS - The composition of the coating complies with recommendations set forth in brochure 1227 of the JORF, with framework resolution ResAP (2004)1 passed by the Council of Europe and with regulation CE N°1935/4. Notes: The coating properties, excluding the aspect, are not affected by actinic radiation. The user must carry out necessary verifications to ensure that the transported products are in no way affected by their contact with the coating. CERTIFICATIONS / APPROVALS DRINKABL : Sanitary Compliance Certificate (french regulation) : 09 MAT E WATER LY 158 TECHNICAL DATA Gloss level Colours Number of components Mix ratio, by weight Mix ratio, by volume Specific gravity Solids volume Solids weight Typical thickness (dry) Typical thickness (wet) Theoretical spreading rate For further information, visit our website : www.maestria.fr Contact : [email protected]

BIOTANK Solvent free epoxy paint, airless "cold spray" INSTRUCTIONS SURFACE PREPARATION New steel « heavy duty use » Abrasive blast clean to Sa 2½ according to ISO 8501-1 : 2007 Medium Grit (ISO 8503-1) (Ra 10-12,5 µm) Concrete The substrate must be at least 28 days old, clean, dry and sound, free from any pollution and capillary moisture. Any traces of old paint should be removed by abrasive blasting if necessary. APPLICATION Mixing : The product is supplied in pre-measured kit form. Pour the hardener part into the base tub and mix, taking care not to incorporate air. The mixing temperature...

BIOTANK Solvent free epoxy paint, airless "cold spray" CURING TIME Drying time Touch dry Hard dry 20 hours 30 hours 12 hours 20 hours 7 hours 10 hours Overcoating interval Minimum Maximum 36 hours 6 days 24 hours 48 hours 12 hours 24 hours Ready for use 14 days 7 days 5 days COMPATIBILITY Previous coat(s) Subsequent coat(s) Itself Itself REGULATORY SPECIFICATIONS AFNOR RATING VOC (Directive 2004/42/EC) AFNOR NFT 36 005 rating Family I Class 6b EU limit value for this product (cat. A/j) : 500 g/l (2010) This product contains max 5 g/l VOC HEALTH AND SAFETY Flash point BASE : Greater than 61°C...