*myarchiexpo

Catalogs
PAULI FRANCE
World of Showers

World of Showers

Product catalog summary

Introduction
Pauli + Sohn GmbH is a family-owned company in Oberberg, Germany, specializing in hardware for glass constructions, particularly shower fixtures. The company focuses on sustainability, using recycled materials and innovative production technologies. Their products are known for quality, durability, and hand assembly.

Product Overview
The catalog includes a range of shower hardware, featuring new products, product comparisons, and assembly instructions. Notable innovations include the EVERYSPACE sliding door system, which offers design flexibility and easy installation without glass drilling.

New Innovations
Innovations include the EVERYSPACE COMFORT system, which attaches a guide rail directly to the side panel, eliminating complex silicone sealing. It features a damping unit and easy height adjustment, along with new surface finishes and accessories like towel holders and handles.

Technical Specifications
The catalog details shower hinges and systems, comparing features like load capacity and maximum door width. The hardware is tested for durability according to DIN EN 14428:2015/A1:2018 standards.

Installation Situations
Installation scenarios for various shower types, including niche, corner, and round showers, are provided. Specific products like swing door hinges and sliding door systems are covered.

Accessories
A range of accessories, including door knobs, towel holders, stabilizer bars, and sealing profiles, are designed to complement the main hardware products and enhance shower installations.

Conclusion
Pauli + Sohn GmbH offers diverse and innovative shower hardware solutions, focusing on quality, sustainability, and customer satisfaction. Their products meet various installation requirements and are backed by rigorous testing and modern production techniques.

Specifications
The FARDELLO shower swing door hinge supports a maximum weight of 42 kg with two hinges and is suitable for glass thicknesses of 6, 8, and 10 mm. It is self-closing during the last 15-20 degrees and fully adjustable in the closed position.

Procedures
Installation instructions emphasize using correct sealing profiles and adequate wall mounting to prevent warping, with detailed measurements for glass processing.

Standards and Norms
The FARDELLO hinge complies with DIN EN 14428:2015 5.5 standards, ensuring durability and safety. ESG 8mm glass must be clear and polished according to DIN EN14428 standards.

Recommendations
For optimal performance, use the hinge with the FLINTER series for folding door systems and appropriate spring technology for different door weights and sizes.

Key Data from Tables and Diagrams
Diagrams and tables illustrate dimensions and installation configurations for various glass thicknesses and hinge types, emphasizing optimal wall mounting.

Critical Information
Attention is drawn to the need for sufficient stiffening of side panels and appropriate sealing profiles to ensure installation integrity and functionality.

Specifications
NIVELLO and NIVELLO+ shower door hinges support glass thicknesses of 8 mm, with a maximum panel size for bathtub applications of 1200 x 1500 mm. The hardware is tested for durability according to DIN EN 14428:2015 5.5 standards.

Design and Features
NIVELLO and NIVELLO+ hinges feature a lifting function, self-closing during lowering, and can be mounted on either the inside or outside of the wall. The design is elegant with concealed screws, and the hinges are flush-mounted for easy cleaning.

Installation and Adjustability
The hinges are independently adjustable by ±2 mm and designed for user-friendly mounting with a flush glass fastening system.

Materials and Finishes
The hinges are available in gloss chrome, matt chrome, and stainless steel optic finishes, suitable for glass thicknesses of 6, 8, and 10 mm.

Recommendations
Install all available striker hinges with sealing profiles to avoid glass damage. The instruction manual is on page 382.

Specifications
Specifications for glass connectors and heavy-duty striker door hinges are provided, suitable for all-glass applications with finishes like gloss chrome, matt chrome, stainless steel optic, and black matt.

Procedures
Instructions for glass processing include miter angles and hole distances for different angles, ensuring precise installation.

Norms and Standards
The TURA heavy-duty striker door hinge supports larger and heavier all-glass doors, with a maximum permissible weight of 70 kg.

Recommendations
Install striker hinges with sealing profiles to prevent glass damage and use specific screws for wall mounting to ensure stability and safety.

Key Data from Tables
Tables provide critical data on miter angles and hole distances for different glass connectors, ensuring accurate installation.

Critical Information
Emphasizes the importance of using correct miter angles and hole distances for different glass thicknesses and angles to ensure structural integrity.

Specifications
Specifications for glass processing and sauna hardware include angle brackets for glass thicknesses of 8, 10, and 12 mm, with finishes in gloss chrome, matt chrome, and stainless steel optic.

Procedures
Installation instructions emphasize correct mounting to prevent glass breakage, especially with laminated safety glass panels.

Standards and Recommendations
The TURA SN series is suitable for all-glass doors in saunas, withstanding temperatures up to 100°C.

Key Features
Load capacity for two hinges is 50kg, suitable for glass doors up to 1000 x 2000 mm with a thickness of 10 mm.

Installation and Maintenance
Installation requires careful attention to avoid damage, with a maximum opening angle of 90°.

Additional Information
References to other pages for more details on specific components like knobs and screws.

Specifications
Specifications for shower door hinges and sliding door systems focus on the PILLANGO and PAPILLON models, designed for mediumweight and heavyweight doors.

Procedures
Installation recommendations include using striker hinges with sealing profiles to prevent glass damage.

Norms and Standards
The durability of the PAPILLON hardware is tested according to DIN EN 14428:2015 5.5.

Recommendations
Install all available striker hinges with sealing profiles for optimal performance.

Key Features and Innovations
The PAPILLON hinge's magnet technology provides reliable door closure without mechanical friction.

Data and Diagrams
Includes detailed diagrams and measurements for various components, providing precise installation instructions.

Overview
Specifications and product information for towel bars and stabilizer bars, including finishes, dimensions, and installation options.

Specifications

Towel Bars: Available in finishes like gloss chrome, matt chrome, stainless steel optic, gold optic, and deep black matt.
Stabilizer Bars: Offered in gloss chrome, pickled aluminum, and other finishes.

Procedures

Installation of towel bars can be customized with set screws positioned either on top or bottom.
Stabilizer bars feature a new clamping technique for easier assembly.

Product Information

Each product is identified by an article number, finish, and description.

Recommendations

Ensure compatibility of finishes when combining different components.

Key Data from Tables

Article numbers and finishes are systematically listed for easy reference.

Overview
Specifications and descriptions of glass hardware accessories, focusing on stabilizer bars and adapters for glass installations.

Specifications Lists multiple glass adapters and stabilizer bars, specifying adjustable angles, dimensions, and compatible glass thickness.

Product Descriptions Each product is described with its article number, finish, and a brief description.

Recommendations Do not exceed 1200 mm in length for stabilizer bars to maintain shower stability.

Key Data Includes tables with product numbers, finishes, and descriptions.

Product Information Specifications and descriptions for door stop limiters and sealing profiles used in construction.

Door Stop Limiters Lists several models designed for wall mounting, available in different finishes.

Sealing Profiles Describes various profiles for shower doors and glass installations.

Key Features Designed to accommodate specific glass thicknesses and configurations.

Installation Notes Provides specific instructions for cutting and fitting the profiles.

Important Considerations Highlights the importance of selecting the correct profile based on glass thickness and installation requirements.

Specifications Specifications for glass panels and accessories used in shower installations.

Procedures Emphasizes proper planning, measurement, and assembly for durability and functionality.

Standards and Norms References compliance with DIN 14428 and TR 24 standards.

Recommendations Consult application engineers for installations in areas with high chlorine or alkaline content.

Key Data from Tables Provides article numbers, descriptions, and packaging units for various accessories.

Critical Information Highlights the importance of following assembly instructions to maintain warranty and liability.

Specifications and Load Transfer Emphasizes the importance of considering load transfer when installing shower doors.

Measurement and Assembly Instructions Professional measurement is crucial to avoid costly mistakes.

Sealing and Splashwater Protection Sealing is essential to prevent water leakage.

Installation and Fixation Proper installation involves ensuring perpendicular alignment and using support bars.

Door Stop Limiters Recommended to prevent over-opening and protect glass and hinges.

General Assembly Instructions Outlines the importance of selecting the right hinge for the local installation situation.

Training and Knowledge The Pauli Academy offers training courses for designers, distributors, and technicians.

Overview Detailed information about training courses and product offerings by Pauli + Sohn GmbH.

Training Programs

Showroom and Training Courses: Pauli Academy offers seminars including workshops and the Shower Master program.
Shower Master Program: A multi-stage seminar program that trains participants in the comprehensive use of P + S shower systems.

Product Offerings

Showroom Solutions: Modular shower systems for showrooms.
Shower Configurator: An online tool for planning and managing shower installations.

Contact Information Lists contact details for Pauli + Sohn GmbH's offices in Germany, Portugal, France, and Sweden.

Catalog excerpts

world of showers complete hardware range

Open the catalog to page 1

Pauli + Sohn GmbH All images, technical drawings and descriptions are copyrighted property of the Pauli + Sohn GmbH technical measurements within the catalog are not binding; subject to change. Any liability for printing errors which have occured during the preparatin of this brochure is excluded. www.pauli.de stand: March 2023

Open the catalog to page 2

world of showers complete hardware range

Open the catalog to page 3

shower fixtures from Pauli + Sohn manufactured in Germany SUSTAINABLE production Pauli + Sohn, based in the region of Oberberg, specializes in the development and production of hardware for glass constructions. As Only high-quality materials are used, which are processed in detail and a family business in the second generation, constant development and exclusively assembled by hand. consistent customer orientation is our highest goal. Pauli + Sohn also takes sustainability seriously: residual raw materials are The materials and the special processing make our shower fixtures a recycled, and water...

Open the catalog to page 4

• highest demands on quality • latest production technologies • innovative development department • solutions for every requirement • sustainable corporate philos

Open the catalog to page 5

content general information introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . our product portfolio in comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . assembly instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . installation situations niche showers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Open the catalog to page 6

content sliding door shower system EVERYSPACE EVERYSPACE - technical details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EVERYSPACE - installation situations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . stainless steel sliding door shower system VIVERE II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIVERE II installation situations . . . . . . . . . . . . . . . . . ....

Open the catalog to page 7

EVERYSPACE COMFORT With EVERYSPACE and EVERYSPACE COMFORT, we have taken the sliding door hardware for the modern bathroom even further. Our focus was on design, ease of installation and reliability. guide rail can be attached directly to the side panel, without connection to the wall side panel attached to the guide rail without complex silicone sealing one- or two-sided damping unit (incl. retractable function) guide rail mounting without glass drilling easy height adjustment (± 3 mm) with glass thickness control (patent pending) The system is flexible and versatile - simply ideal for creating...

Open the catalog to page 8

ZN135 deep black matt new338 shower shelf on page new299 handles and knobs on page new towel holders on page 312

Open the catalog to page 9

stabilizer-bars made in Germany on page 318 Pauli + Sohn has redesigned the shortenable stabilizer-bars from scratch. The round and angular systems offer more stability thanks to the new clamping technology and are easier to install. new clamp technique The internal clamp is pressed against the tube by means of an hexagon socket screw simplified assembly All screws on the individual supports, as well as on the complete bars can be fastened with one hex key.

Open the catalog to page 10

stabilizer-bars made in Germany on page 318

Open the catalog to page 11

shower hinges and -systems comparison MADE IN GERMANY PONTERE base material load capicity of two hinges maximum door width lifting function swing door striker door overlapping door sliding door suitable for sauna applications seal without notching installation without seal possible adjustable closed position self-closing during the final cm concealed wall mount concealed screws flush screws wall mount with oblong holes adjustable angle bracket shower sets with curved glass doors possible *7= ith a door height of 2000 mm w and 8 mm glass *1 = except 8408MS *2 = except 8404MS (35kg when using 2...

Open the catalog to page 12

shower hinges and -systems comparison stainless steel the durability of the hardware was tested in our factory according to DIN EN 14428:2015/A1:2018 5.5 and TR2

Open the catalog to page 13

installation situations - shower door hinges overview installation situation Large or small, niche or round shower - many factors come into play when making the right choice. Not only do the wishes of the customers have to be taken into account, but also the construction situation of the bathroom. On the following pages, we will show you the possibilities with our systems, PONTERE, FLAMEA+, FLAMEA, FARFALLA, PILLANGO, PAPILLON, FLINTER and FLUTURE. You can also find set combinations at www.duschplaner.de.

Open the catalog to page 14

installation situations - niche showers General notes Our installation examples serve for orientation and planning and are not to be understood as complete sets. You can design each type individually and customized to your specifications. When planning and selecting the installation situations, please note the structural requirements and assess the premises precisely. Depending on the application example, the number and Important: 1. shower enclosures must be installed securely and stable. 2. the stabilization depends on the structural situation and the division of the shower enclosure. 3. side...

Open the catalog to page 15

installation situations - niche showers type: niche showers (A) = opening outward – (P) = swing door - (FP) = swing folding-system in combi

Open the catalog to page 16

installation situations - niche showers type: niche showers Depending on the application example, the number and arrangement of stabilizer-bars, door hinges and angle brackets may vary or be required. For detailed information, please refer to our measurement sheets or ask our technical department. Information on standard dimensions of showers and abbreviations can be found on page 15

Open the catalog to page 17

All PAULI FRANCE catalogs and technical brochures

World of balustrades
260 Pages
Canopy
140 Pages

Archived catalogs

Vivere
8 Pages