*myarchiexpo

Canopy

Product catalog summary

Specifications and Materials:
Adhesive regions are specified for glass distances of 10 mm and 10 m, but profiles are unsuitable for nano-coated glass surfaces. Overhead glazing components include aluminum rain gutters with a stainless steel finish and zinc-plated steel wall mount sets. Various mounting plates are available for thicknesses ranging from 80 mm to 300 mm.

Installation and Load Capacities:
Components are designed for attachment to insulated facades and concrete/brickwork, with load capacities varying based on dowel type and installation situation. Specific dowels are recommended for different applications depending on the type of brickwork or concrete.

Maintenance and Cleaning Recommendations:
Stainless steel components require minimal maintenance but should be cleaned regularly, especially in aggressive environments. Routine cleaning every three to six months is recommended using water and a clean cloth. Special phosphoric acid-based cleaners can be used for removing iron particles and achieving an even finish. A table provides guidance on removing contaminants like lime, mortar, iron particles, and corrosion from stainless steel.

Additional Products:
Various items such as compound mortar, anchor rods, perforated sleeves, and washers are available for installation and maintenance. Stainless Steel 2 in 1 is recommended for cleaning and preserving metal surfaces, providing protection against contamination and blotching.

General Recommendations:
Protective films on new stainless steel should be removed early to prevent sticking. For stubborn dirt and specific stains, specialized cleaning agents and techniques are advised to maintain the integrity and appearance of stainless steel surfaces.

Overview:
The document provides detailed guidelines and standards for the design, safety, and installation of overhead glazing systems, focusing on factors such as snow and wind loads, national technical approvals, and maintenance considerations.

Specifications:
The document outlines the specifications for overhead glazing components, including the need for national technical approval (AbZ) for certain products, which simplifies the planning process by eliminating the need for individual approvals or parts testing. It also discusses the importance of adhering to technical rules such as TRPV and TRLV for point fixings and linearly installed glazing.

Procedures:
The document details procedures for determining the appropriate glass thickness and load capacities based on geographical location and environmental factors like snow and wind loads. It provides dimensioning tables and checklists to assist in these calculations, emphasizing the need for static verification by recognized structural engineers.

Standards and Norms:
The document references several standards, including DIN 18008 for glass norms and DIN 1055 for snow and wind loads. It highlights the transition to euro codes (EC1) for load determinations starting mid-2012.

Recommendations:
Recommendations include using national technical approvals to save time and resources, considering geographical and climatic factors when planning installations, and ensuring that all load calculations are verified by professionals. The document also advises on the importance of planning for maintenance access and incorporating these considerations into the static calculations.

Key Data from Tables and Diagrams:
The document includes tables for snow load zones and wind load zones, providing specific load values based on geographical location and height above sea level. It also provides aerodynamic coefficients for canopies and guidelines for calculating speed pressure and load impacts.

Critical Information:
The document stresses the importance of safety in overhead glazing installations, particularly in public and private areas. It provides guidance on obtaining necessary approvals and verifications to ensure compliance with national and regional building regulations.

Design and Safety:
Design considerations include the angle between the canopy and the horizontal line, as well as the angle between the rod and the glass panel. The document highlights the importance of adhering to edge distances for curved glass panels and printed glass canopies.

Special Features:
Special features such as curved leading edges and printed glass canopies are discussed, with guidelines for installation according to national technical approval. The document also covers the use of coloured or printed PVB film and laminated PV cells for energy generation.

Applications:
Applications for corner solutions and windscreen installations are detailed, with pre-dimensioning tables provided for different wind load zones and building heights.

Catalog excerpts

world of overhead glazing Sets – Products – Security

Open the catalog to page 1

overhead glazing Our philosophy: Quality made in Germany Pauli + Sohn operates on the basis of a holistic philosophy based on perfection, quality, tradition and ethics. Our manufacturing base is Germany Pauli + Sohn is known as a security pioneer, which is reflected by the fact and will remain so. Here we have full control over the use of high-quality that many of our canopy systems have received a building permit («AbZ»). materials and meticulous workmanship. For more than 30 years, our con- All our products are controlled both internally and by external, indepen- sistent quality management...

Open the catalog to page 2

overhead glazing Always on the safe side No matter what your specific planning issues are, whether you need con- pleased to bring you into contact with our partners for static and structural sultation for the implementation of your projects, assistance in filing an issues, the Ingenieurbüro Dr. Siebert. Ingenieurbüro Dr. Siebert specializes, individual request for approval («ZiE») or in calculating glass thicknesses for among other things, in glass and associated structural calculations. More the building permit – from P + S you will get expert answers. We will be

Open the catalog to page 3

overhead glazing content comparison of suspended canopies . . . . . . . . . . . . . . . . . . . 6-9 sets according to TRLV . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-41 overhead glazing components . . . . . . . . . . . . . . . . . . . . . . 56-57 sealing profile + rain gutter . . . . . . . . . . . . . . . . . . . . . . 74-75 mounting plate for brickwork + concrete . . . . . . . . . . . 76-79 Accessories for point supports . . . . . . . . . . . . . . . . . . . . . . . 69 safety in overhead glazings . . . . . . . . . . . . . . . . . . . . . . . 86-87 canopies - safe and economic....

Open the catalog to page 4

overhead glazing

Open the catalog to page 5

Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung AbZ 70.3-74 70.3-74 ✓overview of sets and bauaufsichtliche combination possibilitiesZulassung Allgemeine bauaufsichtliche Zulassung bauaufsichtliche Allgemeine bauaufsichtliche Zulassung Allgemeine Zulassung llgemeine aufsichtliche Zulassung SpiegelglasAllgemeineTechnische Regel für bauaufsichtliche linienförmig möglich gelagerte Verglasung Zulassung absturzsichernde Verglasung Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche...

Open the catalog to page 6

AbZ AbZ AbZ AbZ SSH AbZ Z-70.3-74 AbZ SSH 70.3-74 70.3-74 70.3-74 70.3-74 70.3-74 A2 A2 Allgemeine bauaufsichtliche Zulassung Z-70.3-74 Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung SSH AbZ AbZ Material A2 A2 AbZAbZ AbZ ✓ AbZ AbZ ✓ AbZ AbZ AbZ AbZ AbZ Material Allgemeine bauaufsichtliche Zulassung Allgemeine Allgemeine bauaufsichtliche bauaufsichtliche Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung Zulassung Zulassung gemeine...

Open the catalog to page 7

Z-70.3-74 Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung AbZ AbZ AbZ AbZ AbZ AbZ Z-70.3-85 Statik Z-70.3-74 A4 A4 A4 A4 vorhanden SSH Material A2 ✓ A2 A2 A2 canopy sets: 1.4404Z-70.3-74, TRLV and1.4404 AbZ ✓ variable ZiE 1.4404 1.4404 variable variable variable lgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung Allgemeine bauaufsichtliche Zulassung Z-70.3-85 Z-70.3-85 Statik Statik Statik Z-70.3-74 Z-70.3-74 Allgemeine Allgemeine vorhanden AbZ 70.2-28bauaufsichtliche 70.2-28bauaufsichtliche vorhanden AbZ...

Open the catalog to page 8

overhead glazing sets ■ how to find your product quickly A detailed table of contents for the category "overhead glazing" can be found on page 4. The page references lead you to the required products. Illustrations and useful technical drawings can be found on the product pages. Besides the care instructions you will find additional references to detailed product information. The chapter "Design and safety", from page 86 onwards, contains information that provides important assistance for glass dimensioning etc. Furthermore you will find planning processes or application examples for safe building....

Open the catalog to page 9

overhead glazing sets content systematics AbZ Z-70.3-85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13 sets with AbZ Z-70.3-85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-29 systematics AbZ Z-70.3-74 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31 sets with AbZ Z-70.3-74 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33, 36-37 sets according to TRLV. . . . . . . . . . . . . . . . . . . ....

Open the catalog to page 10

overhead glazing sets canopy sets

Open the catalog to page 11

overhead glazing sets systematics + combination possibilities | AbZ Z-70.3-85

Open the catalog to page 12

overhead glazing sets

Open the catalog to page 13

overhead glazing sets Set Basic | AbZ Z-70.3-85 max. glass dimensions depending on the load, examples and dimensioning tables from page 94 onwards

Open the catalog to page 14

overhead glazing sets +

Open the catalog to page 15

overhead glazing sets Set Basic A4 | AbZ Z-70.3-85 max. glass dimensions depending on the load, examples and dimensioning tables from page 94 onwards

Open the catalog to page 16

overhead glazing sets + wall flange Basic A4 Ø 13 treatment products page 81 treatment instructions page 82-83 also possible with glass printing see page 54

Open the catalog to page 17

overhead glazing sets Set | AbZ Z-70.3-85 max. glass dimensions depending on the load, examples and dimensioning tables from page 94 onwards

Open the catalog to page 18

overhead glazing sets + treatment products page 81 treatment instructions page 82-83 also possible with glass printing see page 54

Open the catalog to page 19

overhead glazing sets Set | AbZ Z-70.3-85 max. glass dimensions depending on the load, examples and dimensioning tables from page 94 onwards

Open the catalog to page 20

overhead glazing sets + treatment products page 81 treatment instructions page 82-83 also possible with glass printing see page 54

Open the catalog to page 21

All PAULI FRANCE catalogs and technical brochures

World of Showers
412 Pages
World of balustrades
260 Pages

Archived catalogs

Vivere
8 Pages