LOGO.3 - All benefits at a glance
20Pages

Solid flat steel frame, long durability, versatile applications Benefits: Small number of tie-points (0.62 tie-points/m²) High concrete quality  Quick panel connection with wedge clamps (only 1.8kg in weight)  Profiled flat steel frame for guaranteed sturdiness and long product life span  Quick accessory fastening on multi-functional cross profiles  Vertical or horizontal deployment for all panels  Multi-purpose panel for corners, columns, stop ends  Well-balanced panel selection  Plastic filler pieces enable centimetre precise forming within the system   Technical Data: Panel...

Perfectly balanced panel sizes Benefits: Optimum use of formwork availability through balanced element sorting  Fast forming of large room heights with LOGO.3-3.40m panels without extensions  Form everything to the nearest centimetre within the system with plastic fillers  LOGO.3 panel 270 x 340 cm Benefits: Basic panels 340 x 270 cm with 9.18 m² for fast forming of large surfaces  270 cm for housing construction, 340 cm for industrial construction  The large panels reduce the number of connecting pieces and consequently the forming times to a mi

Fair-faced concrete LOGO.3 meets high demands concerning the concrete surface. The balanced panel sorting offers many possible combinations with regard to tie-points and joint pattern. Benefits: Extremely narrow frame impression Few joints  Low number of tie-points  Optimum concrete surfaces  Max. concrete pressure: 70 kN/m² Tolerances of deflection: According DIN18202, table 3, line 6  

Save tie-points The LOGO.3 manages with extremely few tie-points. Through the targeted use of small and large-size panels, up to 4 tie-points can be saved in the corner area, for example. Also by placing a filler panel between two large-size panels, up to 4 tie-points can be saved. This is valid for all formwork heights up to 270 cm. Benefits: Time-savings Reduced material and labour costs By inserting a filler panel between two large-size panels, 4 tie-points will be avoided. Up to 4 tie-points per corner can be avoided with LOGO.3!

Wedge Clamp - the unique connecting piece Benefits: With 1.8 kg a lightweight among the clamp connections Quick & safe opening and closing from the front Clamp holder Storing of connecting pieces in the formwork panel for faster and more economical forming. Benefits: Connecting pieces always ready to hand Even faster accessory mounting  Optimised construction site logistics  Stacking storage possible  

Plastic filler pieces Plastic filler pieces enable centimetre precise forming within the system. Plastic filler pieces are available for all panel and segment heights and depending on the system in widths of 1 to 4 or 1 to 6 cm. For larger widths several plastic filler pieces can be combined. Benefits: Saves both time and material → faster forming times Durable and dimensionally stable  Smooth surface and therefore easy to clean  A similar surface to film-coated formwork panels  Available in all panel and segment heights  Can be fixed using standard connecting pieces  Can also be...

with 8 tie points Benefits: Four outside and inside tie points each enable a flexible use. Vertical or horizontal position: In vertical position the outside tie-point is used at the panel joint. In horizontal position you can use the necessary lower inside tie point of the panel.  Use as formwork for foundations, for height extensions and small wall heights, beams, parapet walls, etc.  All other panel widths in height 90 cm are available within the system  

Formwork for rectangular or square column sections between 20  cm and 75  cm length (60  cm for LOGO alu) can be made in accor ance with the windmill principle using four LOGO.3 d multi-purpose panels. Benefits: Multi-purpose panel as column formwork Side length 20-75 cm, gradation 5 cm Columns with LOGO outside corner posts Columns can be formed simply using 4 LOGO compensation panels and 4 LOGO outside corner posts joined by wege clamps. Benefits: Compensation panel as column formwork Side length 20-60 cm, gradation 5 cm

Multip from PASCHAL fulfils the most stringent safety standards and increases formwork and concreting efficiency. Benefits: A safe work place at the upper end of the formwork including front protection  Safe work levels  Safe ascents and descents  Lateral protection system Reliable lateral protection according to safety standard EN 13374 Benefits: For a variety of applications Comprehensive safety  Quick, easy assembly  

Safety at work – make it easy Benefits: Unfolded and installed quickly as complete part No repeated loss and repurchase of timber for boarding and railings  Wide and safe work area  Precast wall adapter enables the use of concreting platform at precast wall elements  Permissible surface load 1.50 kN/m²   1 Use of concreting platform with formwork: To use the concreting platform on the formwork, the guard railing and the suspending pieces are folded out, and the complete platform can be hung on the formwork. 2 Corner solution: Within the systems there is a concreting platform for inside...

LOGO.3 Dismantling inside corner post The movable dismantling inside corner post greatly reduces time required to form and dismantle the inner formwork for lift shafts, stairway cores and structures with tight spaces. Benefits: Optimized dismantling procedure Complete inner formwork can be moved as a whole unit  Enormous gain of time  5 cm dismantling clearance per side   There is a hexagonal nut at the upper side of the inside corner post which will be turned to dismantle (clockwise) for dismantling and anticlockwise for pushing in right position before concreting. A spanner size 36 or...

For mounting of plywood stripes for small extensions by site. Benefits: Available in chromised version for plywood thickness 21 mm and in galvanised version for plywood thickness 27 mm.  Simple assembly on the upper panel frame of LOGO.3 panels with the wedge clamp.  Application under close circumstances like shafts where horizontal panels cannot be used or where still a high portion of filler panels despite use of horizontal panels is.  Replacement for smaller horizontal panel widths if not available in sufficient quantity.  There are drillings in the extension bracket for mounting of...