Catalogs >
PARKLEX International >
NATURSOFFIT - W technical sheet

NATURSOFFIT - W technical sheet
1Pages

Catalog excerpts

Doc.:FTNATURSOFFIT - W TECHNICAL DATA SHEET RESULTS TESTS MEASURE UNIT FTSOFFIT Rev: 0 1. INSPECTION REQUIREMENTS Colour, pattern and surface finish Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood. Edge straightness Edge squareness Cleanability level Maximal height for which no visible surface cracking or imprint greater than 10 mm Permanent blue marker Dimensional stability at elevated temperature Resistance to impact by large diameter ball Water based ink black marker Grey scale rating Determination of graffiti resistance 4. WEATHER RESISTANCE REQUIREMENTS Resistance to artificial wheatering FOR MODERATE OUTDOOR CONDITIONS (EGS) 5. CE SAFETY REQUIREMENTS Reaction to fire Thermal resistance/Conductivity Water vapour permeability > 3.000 Screw holding value for t = 8 mm Secrew holding value for t = 10 mm Flexural strength Flexural Modulus Density Resistance to wet conditions Flexural strength Resistance to climatic shock Elastic modulus Moisture absorbed (1) Provided that the laminates are stored in the manner and conditions recommended by the manufacturer.

Open the catalog to page 1