Facade Cladding
27Pages

FACADE CLADDING

FACADE CLADDING

Facade is a laminated wood board for exteriors that requires zero maintenance. The panels combine the virtues of wood, its natural warmth and beauty, with technical requirements to ensure optimum performance on exteriors over time. Facade can be installed as a ventilated fagade by way of louvres or overlapping slats, on false ceilings and on curved walls.

Product: Facade / Wood: Copper Sutton Offices in Magog (Quebec, Canada)

Zero maintenance wood The surface composition of the Facade boards protects the wood from the most extreme weather conditions, removing any need for subsequent treatment. Product: Facade / Wood: Copper Golden View Residence, by Workshop AD (Anchorage, AK, USA) Weather resistance The EN 438-6:2005 European standard specifies that compact exterior cladding such as Facade must offer a certain resistance to weather according to the Resistance to Artificial Weathering Test. After 3000 hours of exposure, the material should have a rating variation of >4 in appearance, and a rating of >3 in...

Product: Facade / Woods (from left to right): Gold, Onyx, Copper Residences in Pacific City, by MVE Architects (Huntington Beach, CA, USA)

The ventilated façade is an efficient bioclimatic architecture solution that provides thermal insulation. In other words, it reduces heat dissipation in the cold months and heat absorption in the warmer months, resulting in a marked improvement in comfort inside the building. Product: Facade / Wood: Copper Residences in Pacific City, by MVE Architects (Huntington Beach, CA, USA)

Product: Facade / Wood: Onix Manning Toronto, by Richard Wengle Architects Inc. (Toronto, ON, Canada)

Product: Facade / Wood: Copper Lazaridis Hall, Wilfrid Laurier University, by Diamond Schmitt Architects with David Thompson Architect Ltd. (Waterloo, Ontario, Canada)

Product: Facade / Wood: Quartz Turnagain Beach House Anchorage, by KPB Architects (Alaska, AK, USA)

Product: Facade / Wood: Copper The Point, Tadley Community Centre, by Ayre Chamberlain Gaunt Architects (Hampshire, UK)

Product: Facade / Wood: Copper Residence in Varese, by Franzetti Primi Architetti Associati (Varese, Italy)

Product: Facade / Wood: Copper Residence in Varese, by Franzetti Primi Architetti Associati (Varese, Italy)

Product: Facade / Wood: Copper Residences in Rue des Orteaux, by Bob361 Architectes (Paris, France)

Product: Facade / Wood: Copper Rainbow Group Headquarters, by Studio Bianchi (Loreto, Ancona, Italy)

inmrir Product: Facade / Woods: Copper and Antra Gateway Apartments, by Brooks+Scarpa Architects (Marina Del Rey, CA, USA)

The Facade panels are available in nine shades that are obtained through ayous or okume veneer, which we get from forests that respect controlled felling. Due to the fact that wood is a natural product, each veneer must be considered as unique. The presence of slight differences in colour and structure is normal. Peculiarities such as knots or resin inclusions are not considered to be defects, but as part of the decoration. Depending on the species and the source of the wood, differences in performance may be observed, as regards the colour's light fastness. For this reason, no claims will...

Product: Facade / Wood: Copper Le Monastère des Augustines, by ABCP Architecture (Quebec, Canada) The Facade installation system in fixed louvre mode enables slats to be installed at 0º, 30º and 60º, both horizontally and vertically. Valid for boards with a thickness of ≥10 mm. Parklex® supplies the slats in three different widths: 86, 94 and 114 mm, with a maximum slat length of 244

Product: Facade, Dry Internal / Wood: Copper Le Monastère des Augustines, by ABCP Architecture (Quebec, Canada)

Product: Facade / Wood: Copper KNDU Villas, by GAD Architecture (Antalya, Turkey) The flexibility of the wood fibres allows the Facade panels to adapt to certain radii of curvature, whether concave or convex. Parklex® offers two different solutions for projects that require Facade to be installed as a curved façade cladding: either standard panels, if radii above 3 m are required; or pre-bent panels, if smaller radii are required.

The overlapping slats system enables a range of assembly procedures without needing to change the position of the parts' profiles. Two different slat widths are supplied: 190 and 290 mm, both with a maximum length of 2440 mm. This concealed fixing system is only valid for thicknesses of 8 mm. Product: Facade / Wood: Copper Alliance 1892, Cognac Museum and Cellar, by TOTEMENT | PAPER (Chernyakhovsk, Kaliningrad, Russia)

The Facade boards can be installed on false ceilings by means of exposed or concealed fixing systems. In the case of false ceilings, a minimum perimeter space of 20 mm must be left to enable ventilation through the chamber. Product: Facade / Wood: Copper Sutton Offices in Magog (Quebec, Canada)

Tests Standard Property or attribute Unit of Thickness (t) EN 438-2 Part 5 6.0 < t < 8.0 mm Dimensional stability EN 438.2 Part 17 Cumulative dimensional change % max. longrain Resistance to UV light EN 438-2 Part 28 Contrast Grey scale rating > 3 Resistance to artificial weathering EN 438-2 Part 29 Contrast Grey scale rating > 3 * 6 mm only for special applications. Please ask us if you require other thicknesses.

EDITING & PRODUCTiON PARKLEX INTERNATIONAL S.L.U. ART DIRECTION JAUME RAM^REZ STUDIO TExT CHESCA GUIM PHOTOGRAPHY MARQAL VAQUER YOSIGO PRINTED IN BARCELONA BY AGPOGRAF SEPTEMBER 2018

PARKLEX POLIGONO ALKAIAGA, C/BALDRUN 31780 BERA - NAVARRA - SPAIN TEL. +34 948 625 045 PARKLEX@PARKLEX.COM www.PARkLEX.COM