video corpo

Catalog with main products, technical parameters and capabilities
44Pages

{{requestButtons}}

Catalog excerpts

Catalog with main products, technical parameters and capabilities - 2

GLASS STRUCTURES ALUMINUM STRUCTURES UPVC STRUCTURES WINDOWS/ PROFILE SYSTEMS PROFILE SYSTEMS / WINTECH TECHNICAL POSSIBILITIES OF GLASS PROCESSING DOORS/ PROFILE SYSTEMS INSULATED GLASS UNITS SLIDING SYSTEMS/ PROFILE SYSTEMS GLASS PROCESSING MAIN CHARACTERISTICS OF POPULAR INSULATED GLASS UNITS DOORS AND PARTITIONS SLIDING SYSTEMS SHOWER CABINS AND SHOWER ENCLOSURES GLASS RAILINGS GLASS CANOPIES 02 // paritetcompany.com PROFILE SYSTEMS / KÖMMERLING

Open the catalog to page 2
Catalog with main products, technical parameters and capabilities - 4

GLASS STRUCTURES

Open the catalog to page 4
Catalog with main products, technical parameters and capabilities - 6

TRANSPARENT GLASS ULTRA-TRANSPARENT GLASS Transparent glass with a high level of light transmission. The edge has a greenish tint. Glass with a higher level of transparency. The edge has a blue tint. TINTED GLASS MATTE GLASS Less transparent glass with the addition of metal oxides to the glass mass. Primary colors: bronze, grey, green, blue and their tints. Glass with a low level of transparency. High light transmission. SMART GLASS Glass with electrically controlled transparency. Produced by laminating of the smart film.

Open the catalog to page 6
Catalog with main products, technical parameters and capabilities - 7

GLASS PROCESSING TEMPERED AND CURVED GLASS ENAMELED GLASS Large-format glass tempering furnace 6000*3210 mm. Extensive capabilities for the production of curved glass. Tempered high-strength glass with a ceramic paint (enamel) coating applied to one of the surfaces, subjected to heat treatment. LAMINATED GLASS / CURVED LAMINATED GLASS HIGH-PRECISION DRILLING OF HOLES Large-format equipment for the production of laminated glass 4000*2400 mm. With precise positioning of the hole position on the glass and precise adherence to the technical specifications.

Open the catalog to page 7
Catalog with main products, technical parameters and capabilities - 8

GLASS PROCESSING MILLING HOLES, CUTOUTS, GROOVES SAND BLASTING Large-format glass tempering furnace. Technological holes of complex shapes, figured and artistic cutouts. Blasting glass/mirror with an air and sand jet to create a matte surface. GLASS EDGE PROCESSING On rectangular and with different angles of glass sheets. Edge types: standard (flat edge with chamfers), round or 45-degree angle. Types of edging: dulling or chamfering, euro polishing, euro grinding.

Open the catalog to page 8
Catalog with main products, technical parameters and capabilities - 9

* the diameter of the hole should not be less than the thickness of the glass GLASS REINFORCEMENT, TEMPERING AND BENDING HEAT SOAK TEST Artificial ageing of glass. Purpose: to reduce the risk of spontaneous fracture of tempered glass during its operation.

Open the catalog to page 9
Catalog with main products, technical parameters and capabilities - 10

DECORATING GLASS AND MIRRORS TYPES OF PROCESSING ** L - length, H - height of the workpiece

Open the catalog to page 10
Catalog with main products, technical parameters and capabilities - 11

INSULATING GLASS UNITS (IGU) SINGLE-CHAMBER INSULATED GLASS UNIT TWO-CHAMBER INSULATED GLASS UNIT THREE-CHAMBER INSULATED GLASS UNIT Pane of glass thickness is 4-12 mm. Thickness of the insulated glass unit IGU is from 16 to 44 mm. Weight is from 20 to 60 kg/m². Pane of glass thickness is 4-12 mm. Thickness of the insulated glass unit is from 28 to 80 mm. Weight is from 30 to 90 kg/m². Glass thickness is 4-6 mm; Glass unit thickness is from 40 to 80 mm; Weight is from 40 to 60 kg/ m². ENERGY EFFICIENT Pane of glass thickness is 4-12 mm. High light transmission. The main tinting colors are...

Open the catalog to page 11
Catalog with main products, technical parameters and capabilities - 12

«AESTECH» RUGGEDIZED INSULATING GLASS UNIT MAIN ADVANTAGES • Large format in facade structures – up to 19.2 sq m, in dome structures – up to 4.0 sq m. • Low level of optical distortion. • Preservation of inert gases in the insulating glass units’ inter-pane space in the course of operation. • Edge zones are the most loaded (in standard insulating glass units, the most loaded zones are the corner ones). • It is 20-25% more energy-efficient due to the absence of metal in the structure. • Better noise insulation due to the absence of continuous aluminum profiles between floors. • No...

Open the catalog to page 12
Catalog with main products, technical parameters and capabilities - 14

Curved insulated glass units Single-chamber and double-chamber. Maximum dimensions: 1800122440 mm. Radius: from 900 mm to 15,000 mm. Jumbo insulated glass units. Large-size insulated glass units with the maximum size: 300026000 mm. Standard shapes and dimensions Non-standard shapes (circles, ellipses, triangles, trapezoids, etc.) Glass units with a protrusion of the outer glass Usually, they are used for structural glazing of facades. Spacer in insulating glass units: Distance between glass panes ranges from 8 to 24 mm in 2 mm increments. Available in: black and gray colors. • Aluminum...

Open the catalog to page 14
Catalog with main products, technical parameters and capabilities - 15

MAIN CHARACTERISTICS of popular insulated glass units FOR ALUMINUM STRUCTURES Insulating glass unit formula Number of chambers, thickness of a IGU, mm (weight per 1 sq. m)

Open the catalog to page 15
Catalog with main products, technical parameters and capabilities - 16

LT - light transmission. The total amount of visible light entering the room through the glass. LR - reflectivity. The ability of glass to reflect the environment. Insulating glass units with high LR have a low level of visual distortion. Ra - color rendering The ability of glass to render colors in comparison to how they are perceived by the human eye in daylight. The lower the Ra value, the worse the colors of the illuminated object are rendered. UV - transmittance of ultraviolet radiation. The total amount of ultraviolet radiation entering the room through the glass panes. TE,% - the...

Open the catalog to page 16
Catalog with main products, technical parameters and capabilities - 17

SLIDING SYSTEMS SLIDING DOORS DOOR IN THE DOOR FRAME

Open the catalog to page 17
Catalog with main products, technical parameters and capabilities - 19

SLIDING SYSTEMS ROTARY SLIDING SYSTEM Frameless sliding glazing is used for: • • • • • • terraces balconies verandas pavilions restaurants shopping centers A glazing system that slides and folds to reveal the entire opening. It can be used both outdoors and indoors. SLIDING SYSTEM (SLIDING) Dimensions of the sliding system • • • • • Maximum panel dimensions: width – 900 mm, height 3000 mm. The system length is not limited. The number of panels on the guideway – from three to five. Minimum threshold height 7.5 mm. Tempered glass of 8-10 mm is used in sliding systems. A glazing system that...

Open the catalog to page 19
Catalog with main products, technical parameters and capabilities - 20

SHOWER CABINS AND ENCLOSURES Shower door Shower door Shower cabin Shower cabin Shower door Shower door Shower partition Curtain for the bathroom SALINA

Open the catalog to page 20
Catalog with main products, technical parameters and capabilities - 21

SHOWER CABINS Glass for shower cabins is 8 mm thick. Glass color: transparent, extra transparent, tinted in bulk bronze or grey. Types of cabins: shower curtain (without door), cabins with open doors, and cabins with sliding doors. The furniture is made of stainless steel and can be in such colors as glossy chrome, matte chrome, black. paritetcompany.com // 21

Open the catalog to page 21

All PARITET LLC catalogs and technical brochures