Aestech glass units system
20Pages

gas-filled inter-pane space AESTECH RUGGEDIZED INSULATING GLASS UNITS secondary sealing (reinforcing) layer AESTECH ruggedized primary sealing layer reinforcing profile insulating glass unit consisting of two or more glasses

load distribution in a typical insulating glass unit load distribution in Aestech ruggedized insulating glass units ^ aestech KEY ADVANTAGES \/ large size in fapade structures - up to 19.2 sq.m., in dome structures - up to 4.0 sq.m. \/ low level of optical distortion. \/ preservation of inert gases in the insulating glass units' inter-pane space in the course of operation. \/ edge zones are the most loaded (in standard insulating glass units, the most loaded zones are the corner ones).

EXTERNAL FRAMELESS FACADE GLAZING STRUCTURES The L-shaped brackets are inserted into the reinforcing sealing contours of the reinforced insulating glass units with their short sides, and attached to the holding brackets mounted to the floor panels with their long sides.

EXAMPLES OF OPTICAL DISTORTION paritetconnpany.conn

When resisting wind loads, a conventional insulating glass unit operates as a system of 2 parallel panes with a relatively soft spacer, which has limited ability to transfer the load from the outer pane to the inner one. If a strong and relatively rigid spacer with high adhesion to the glass is used, which limits the linear movement of the panes relative to each other, the insulating glass unit turns into a flat tube in which the load on the outer pane can be transferred to the inner pane to a large extent, i.e. the insulating glass unit turns into a glass block. The increased resistance of...

\/ 20-25% warmer due to the absence of metal in the structure. n/ better noise insulation due to the absence of continuous aluminum profiles between floors. \/ possibility to carry out work if there is at least one floor. \/ minimum optical distortion. \/ no condensation in the elements of the fagade system. (There are no hidden profiles in the system, and therefore no condensation that needs to be drained). \/ reduced work completion time. \/ minimum budget at the start of the work. \/ the fagade looks aesthetically pleasing, lighter and more attractive. \/ the absence of metal in the...

^ aestech COMPARISON OF MULLION-TRANSOM STRUCTURES AND ATRANSOM (MULLION-LESS) SYSTEM paritetcompany.com

PARITET, together with its partners, developers and designers of the unique mullion-less glazing system technology (Aestech), produces Aestech ruggedized insulating glass units, improves the innovative system and implements it on the most complex and impressive projects.

CONTACT US e INSTAG RAM @ pa ritetcom pa ny