PANEL SANDWICH DESCRIPTION The wood cement board is made up of a exterior water-repellent wood-cement board (16 to 19 mm) that allows a total watertightness, avoiding thermal filtrations, humidity or leaks; an interior board made of wood chips and cement (8 or 10 mm) and, lastly, protected by the two boards is an inner insulating polyurethane core of 35kg/m3 of density, which provides a spectacular thermal insulation. This SIP panel also allows savings in assembly thanks to the tongue-and-groove joint system incorporated ensuring a correct joint reinforcing thermal insulation and minimizing possible leaks. For core thicknesses 140, 160, 180, 200 and 240 mm the manufacturing sizes are 2490 x 600 and 2990 x 600 exclusively. * The loads provided in the following document are understood as design loads. * The safety of materials has been made in accordance with DB SE-M (March 2006). See our range of sandwich panels and accessories on our website https://sandwich-panel.net

CROSS SECTION OF THE WOOD CEMENT BOARD PANEL JOINTS One of the main advantages of the Wood Cement Sandwich Panel is the installation system. The assembly enhances this resistance since its tongue and groove reduce leaks and leaks while ensuring a correct meeting between the sandwich panels. If you are looking for a completely waterproof installation? You can complement the panel with accessories such as Asphalt Fabric or Plate under Tile that provides total tightness to the roof. In addition, the cost of labor or machinery necessary for installation reduces drastically, so the customer enjoys...