COVER-JOINTS SANDWICH PANEL DESCRIPTION_ Roof Panel with three frets and an aditional coating on the joint between two plates for a greater protection against leaks and humidity. Its insulating core is manufactured in PUR and PIR foams of high density, at 40 kg/m3, to ensure outstanding thermal insulation in all types of situations. Its simple assembly is a great saving for the customer the panel overlaps in the frets of two contiguous panels and then is covered with an additional staple. In its manufacture special steels are used, galvanized and pre-lacquered, complying with the EN 508-1 standard, with PET, Plastisol, PVC coatings, PVDF, PS50, PS55 and PS200, among others, according to customer requirements. LOADS TABLES OF THE COVER-JOINTS SANDWICH PANEL See our range of sandwich panels and accessories on our website https://sandwich-panel.net

CROSS SECTION OF THE COVER-JOINTS SANDWICH PANEL In the installation of the Flashing Panel, we must ensure the correct overlap between two adjacent plates, so that the EPDM gasket protects the joint from possible condensation. The panel is fastened directly to the structure from the joint between two panels with the self-drilling screws provided. On this point, an additional coating is incorporated to protect the protects the joint from possible leaks or dampness. Although polyurethane is not a hydrophilic material, it is advisable to complete the installation with the appropriate trims to seal...