(TDS) Regular Rey Gypsumboard

Product catalog summary

Description: Panel Rey's Regular Gypsum Board is a fireproof drywall product with a gypsum core, covered on both sides with 100% recycled paper. It is available in various lengths and thicknesses and does not contain asbestos.

Basic Applications: This drywall is used for covering and protecting walls and ceilings in residential projects. It can be attached using screws, nails, or adhesives on wood, metal, or existing surfaces. When joints are treated, it prevents smoke passage.

Thickness Options:

3/8” Thick: Suitable for double coat wall systems and remodeling projects, easily moldable to curved surfaces.
1/2” Thick: Recommended for single coat applications on dividing walls.
5/8” Thick: Offers higher fire resistance and reduced acoustic transmission.

Limitations: Designed for interior use only. Avoid exposure to temperatures above 125°F/52°C and excessive moisture. Not a structural element and should not be used as a nailing base.

Handling and Storage: Keep drywall dry to prevent mold growth. Protect during transit with weather-tight covers and store in a dry area with proper support to avoid sagging. Handle with care to prevent damage to edges and corners.

Good Installation Practices: For curved surfaces, moisten the drywall for flexibility. Refer to Gypsum Association Journal GA-214-97 for finishing levels. Ensure clean surfaces and proper ventilation during installation.

Fire Resistance: Fire resistance is determined by tests in independent labs. Ensure all components meet specified standards.

Applicable Standards: Manufactured according to ASTM C-1396 Section 5 (C-36) and ASTM C-36. Installation follows ASTM C-840. Surface burning characteristics tested under ASTM E-84 with flame spread and smoke developed ratings of 0.

Product Data: Available in nominal dimensions with beveled edges. Thermal resistance varies by thickness. Physical properties include weight, nail pull resistance, core and edge hardness, and flexural strength.

Catalog excerpts

Regular Gypsum Board

Open the catalog to page 1

Regular Gypsum Board Description Panel Rey’s Regular drywall is a product with a fireproof core essentially made of gypsum. The drywall is covered on both sides with 100% recycled paper. The paper, on the front, covers the beveled edges to strengthen and protect the core. The ends are square cut and finished smooth. Panel Rey Fire Resistant Drywall is offered in a wide variety of standard lengths and thickness. Panel Rey products do not contain asbestos. Basic Applications Panel Rey Regular drywall is used to cover and protect walls and ceilings in residential projects. This product is designed...

Open the catalog to page 2

Good Installation Practices Installation: Work temperature must be not less than 10° C for the application of adhesives on the drywall when treating joints, texturing and decoration. Proper ventilation in the work area is required. Curved Surfaces: To apply a drywall on a curved surface, fix one of the ends of the drywall and gradually push the other end of the same, pushing the core against the frame until the desired curve is reached. To get lower radios than the ones shown in the table below, moisten the front and back of the drywall with water, allowing the core to be moistened for not less...

Open the catalog to page 3

For more information contact us: Customer Service USA 1 800 862 9022 Phone +52 (81)8345-0055 E-mail [email protected] Web Site www.panelrey.com Panel Rey S.A. Serafin Pena #935 Sur Col. Centro Z.C. 64000 Monterrey, N.L.

Open the catalog to page 4

All Panel Rey catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list