Spray Texture powder & ready mix

Product catalog summary

Description: Panel Rey® Spray Texture is a powder compound designed for application over most properly prepared interior surfaces to create various texture patterns using different tools. It requires a minimum temperature of 50°F during application and drying, with adequate ventilation to remove excess moisture. Surfaces must be smooth, clean, and dry, with a sealing primer applied to prevent sagging and discoloration.

Preparation: For the powder, mix one 50 lb bag with approximately 4 gallons of clean water to achieve a lump-free consistency. For ready-mix, adjust consistency with water as needed. Follow equipment manufacturer instructions for application and cleaning.

Advantages: Easy mixing, spreads easily, non-aggregated texture, developed for different patterns, and prevents undesired effects like pinholes and craters.

Common Patterns: Includes Spatter/Knockdown, Acoustic, Spatter, and Orange Peel.

Limitations: Indoor use only, not a finished surface, sealing primer required, and avoid over-thinning to prevent adhesion issues.

Technical Data:

Powder: Off White color, 4 gal water per 50 lb bag, drying time 60-90 min, coverage 25-45 ft²/lb, 6-month warranty, store dry.
Ready-mix: Off White color, drying time 60-90 min, coverage 15-30 ft²/lb, 6-month warranty, store dry.

Technical References: Consult ASTM C840, GA-214, and GA-216 for application and finishing standards.

Cautions: Dust or mist may cause irritation; use respirators and eye protection. Ensure good ventilation. In case of eye contact, flush with water for 15 minutes and seek medical advice if necessary. Keep out of reach of children.

Warranty and Complaints: Complaints must be in writing within 30 days of discovery and within the warranty period. Do not alter or repair affected areas before review by Panel Rey. Liability is limited to replacement of defective material.

Contact Information: For more information, contact Panel Rey S.A. via phone or email, or visit their website.

Catalog excerpts

Spray Texture powder & ready mix

Open the catalog to page 1

Description Panel Rey® Spray Texture is a powder compound designed for application over most properly prepared interior surfaces. It is used to create a wide range of texture patterns using roller, brush, hoper-type gun or plastering spray pump machines. Preparation In cold weather (outside temperatures below 50°F), temperatures within the building should be maintained at a minimum 50°F, both day and night, before and during spray operations and until sprayed surfaces have fully dried. Adequate ventilation should be provided to eliminate excess moisture. Surfaces, including joint-treated areas,...

Open the catalog to page 2

PANEL REY® SPRAY TEXTURE is specified for indoors application only. PANEL REY® SPRAY TEXTURE is not considered a finished surface. Sealing primer is required before or after texturing to avoid difference in sheen on wall and ceiling surface. Do not overthin, as poor adhesion or texture variation may result. Product Technical data Powder: Color: Off White. Dilution: 4 gal of clean water per 50 lb bag. Drying time (80°F / 50% RH): 60 – 90 min. Coverage: 25 – 45 ft2/lb depending on texture pattern and dilution. Storage: Store in covered and dry place. Warranty: 6 months. Packaging: 50 lb. (bag)...

Open the catalog to page 3

All Panel Rey catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list