FIRE REY GYPSUMBOARD TDS

Product catalog summary

Product Overview: Panel Rey's Fire Resistant Drywall is designed with a fireproof gypsum core reinforced with high-temperature resistant fibers, providing enhanced strength and fire resistance. It is covered with 100% recycled paper and is available in standard lengths and thicknesses. The product is asbestos-free and suitable for residential and commercial construction.

Specifications: The drywall is available in two thicknesses: 1/2" for single coat applications in dividing walls, and 5/8" for higher fire resistance and reduced acoustic transmission. It is designed for interior use only and should not be exposed to temperatures above 50°C or excessive moisture.

Installation Guidelines: The drywall should be installed using screws, nails, or adhesives on wood, metal, or existing surfaces. Proper ventilation and a minimum work temperature of 10°C are required during installation. Joints should be coated to prevent smoke passage.

Handling and Storage: Drywall must be kept dry to prevent mold and fungi growth. It should be stored off the ground with adequate support and protected from weather. During transport, it should be covered and laid flat, not on edges.

Standards and Certifications: The product complies with ASTM C-1396, ASTM C-840, and ASTM E-84 standards. It has a flame spread and smoke development rating of 0. It is classified by Underwriters Laboratories according to ASTM E-119 and ASTM E-84.

Physical Properties: The drywall has specific weight, nail pull resistance, core and edge hardness, and flexural strength properties. It is available in nominal dimensions with special lengths upon request.

Contact Information: For more information, contact Panel Rey S.A. via phone or email, or visit their website.

Catalog excerpts

Drywall Solutions PANEL DE YESO RESISTENTE AL FUEGO FIRE RATER GYPSUM WALLROARD Fire Rey Gypsum Board

Open the catalog to page 1

Gypsum Board Fire Rey X Description Panel Rey’s Fire resistant drywall is a product formed by a fireproof core essentially made of gypsum and reinforced with the addition of high temperature resistant fibers. This provides a higher strength and fire resistance to the drywall when it is used in previously evaluated assemblies. The drywall is covered in both sides with 100% recycled paper. The paper, in the front, covers the beveled edges to strengthen and protect the core. The e ends are carefully grinded in square cut. Panel Rey Fire Resistant Drywall is offered in one single variety of standard...

Open the catalog to page 2

Good Installation Practices Installation: Work temperature must be not less than 10° C for the application of adhesives on the drywall when treating joints, texturing and decoration. Proper ventilation in the work area is required. Decoration: The designer, contractor or proprietor must refer to the Gypsum Association Journal GA-214-97 "Recommended Levels of Gypsum Board Finish" to select the appropriate level of finishing and get the desired result. All surfaces must be clean, free of dust and grease. For porosity between the surface of the paper and the compound to be smooth, it must be treated...

Open the catalog to page 3

For more information contact us: Customer Service USA Panel Rey S.A. Serafin Peña #938 Sur Col. Centro Z.C. 64000 Monterrey, N.L.

Open the catalog to page 4

All Panel Rey catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list