Easy Set Compound Description: Easy Set is a no asbestos Lightweight Setting Type Joint Compound ideal for diverse interior an exterior applications according to the setting and working time range selected that permit a fast joint finishing and next-day decoration. This product is formulated for tape embedding, cracks filling and finishing over gypsum board interior applications, including metal corner bead and drywall trim. Easy Set performs especially well when used for taping, filling fasteners and repairing deep cracks and holes. Hardly recommended in fishing areas with a high relative humidity and where water - resistant boards are specified because it is almost no affected by humidity. Easy Set compound is lightweight for easy handling and sanding. Do not expose directly to weather and apply one coat of a latex primer if used in exterior areas. Complies and exceeds ASTM C475. Availability: Approximately setting time (in minutes):

Features: • Ideal for drywall finishing and crack filling. • Lightweight – Weighs up to 10% les than regular compounds for easier handling. • Easy sanding – sands easy for faster and smoother finishing. • Minimizes shrinkage and cracking. Virtually unaffected by humidity. • Can be used when high humidity weather without delaying job completion Mixing Use clean water and equipment. Mix an 18 lb bag of Easy Set dry powder and 1.3 gal (5 liters) of water using a hand tool method. Mix powder thoroughly into water until completely wet. Initial mix should be slightly thicker or heavier the desired...