Compound ReadyMix UltimaLight
2Pages

Ultima light Ready Mix Ultima Light Compound Ultima Light Compound is the best option for a smooth, manageable application and sliding. It is extremely easy to sand due to its properties of low density ready mix. This is a totally different product, since it is 20% lighter than traditional compounds. It offers a higher coverage and efficiently reduces shrinkage and cracks. Features an excellent adhesion to substrate and its new green formula has a VOC content lower than 1 g/l -Recommended applications: For treating joints and accessories, textures and final finishing in corners and edges, as well as for repairing screw and nail heads. - Coverage 9.8 ft2/lb (2.0 m2/kg) - Availability: Box: 38 lb (17.4kg)-3.5 gal (13.2L)

General Application Cover drywall joint with a thin coat of prepared compound and soak the reinforcement tape, leaving a coat of approximately 1/32"(1mm) under the tape. Drying time may vary depending on the weather conditions, the type of compound First and the amount of water. Compound Coat Let dry before applying a second coat, which will cover 2" (5 Joint Tape cm) more in each side of the ends of the first coat. Let dry Covered Screws Second Compound again and smoothly sand the section with compound. FinaCoat lly, apply a third coat covering 2"(5 cm) more than the last Third coat in...