Amorton
6Pages

Visit our website for product information Customer Consultation Service Product inquiries Panasonic Amorton Telephone reception: 9:00 a.m. to 5:00 p.m., Monday through Friday Hours are subject to change, especially during the following long vacation periods: Golden Week, summer vacation, and the end-of-the-year. Your understanding is greatly appreciated. Amorphous Silicon Solar Cells Amorphous Photosensors General Catalog of Specifications for Lighting Levels Indoors and Outdoors ■Handling Amorphous Silicon Solar Cells and Amorphous Photosensors Handling Precautions ★Use care around broken glass to avoid injury. ★Avoid touching solar cells during the daytime because they get very hot when the sunlight is strong. ★If the light-receiving side is stained/smudged, the electrical output will decline due to a decrease in the incident light. Carefully clean the sides to remove stains. ★Pressing or scratching the energy-generating area with a hard object may decrease the output. ★These products are not water-resistant, or water-repellent, or shock-resistant. When using them outdoors, avoid getting them wet by placing them in an airtight container, when appropriate. ★When using your product, consider a fail-safe or redundant design. ★Consider a proper method for static electricity removal. Static electricity may damage the power generation element and decrease the output. ★Do not apply an indoor Amorton to a product that requires an outdoor environment. Proportional output levels of light may not be obtained under high illumination. ★Do not apply an outdoor Amorton to a product that requires an indoor environment. The necessary output may not be obtained under low light levels. ★Please test your products for anomalies and circumstances that cannot be predicted by evaluating a single Amorton. Outdoor lighting levels ★Store in a cool (under a specific temperature range of -20℃∼70℃), low-humidity environment free of corrosive gas to avoid such problems as electrode corrosion to the solar cells. Points to Consider in Adopting Our Products ●Any and all of our products described or contained herein are, with regard to standard application, intended for use as general electronics equipment, including home appliances, AV equipment, communication devices, office equipment, industrial equipment, etc. The products mentioned herein are not intended for any special applications (such as life-sustaining medical equipment, aerospace instruments, nuclear control devices, appliances for burning, transportation machines, traffic signal systems, safety equipment, etc.) that require extremely high levels of reliability and can directly threaten human lives during product failure or malfunction that might threaten lives; no guarantees thereof shall be granted. If you intend to use our products for applications outside the standard applications and/or outside the scope of the intended standard applications, please consult us prior to such use. Without such consultation or inquiry, the customer shall be held solely responsible. ●Specifications of any or all of our products described or contained herein stipulate the performance, characteristics, and functions of the described products in their independent state and are not guarantees of performance, characteristics, and functions as mounted in the customer’ products or s equipment. To verify the symptoms and states that cannot be evaluated in independent devices, the customer should always evaluate and test devices mounted in its products or equipment. ●Our company assumes no responsibility for equipment failures that result from using products at values that exceed (even momentarily) the rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in the products specifications of any and all of our products described or contained herein. ●Our company supplies high-quality high-reliability products; however, any and all semiconductor products may fail or malfunction. Such probabilistic failures or malfunctions might cause accidents or incidents that could endanger lives, problems that might produce smoke or fire, or accidents that might damage property. At the time of the equipment design, adopt safety measures to avoid such accidents or events. Such measurements include but are not limited to protective circuits and error prevention circuits for safe, redundant, and structural designs. ●In the event that any or all our products described or contained herein correspond to restricted freight regulations stipulated in the Foreign Exchange and Foreign Trade Act, such products may require an export license from the concerned authorities in accordance with the above law. ●No part of this publication may be reproduced or transmitted in any form or any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system or otherwise, without the prior written consent of our company. ●Any and all information described or contained herein is subject to change without notice due to product/technology improvements, etc. When using equipment, refer to the Delivery Specifications for the product that you intend to use. ●Information (including circuit diagrams and circuit parameters) herein are only examples; the volume of production is not guaranteed. ●Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to the intellectual property rights or any other rights of our company or any third party. Our company shall not be liable for any claim or suits with regard to a third party’ intellecs tual property rights which resulted from the use of the above technical information and products. The Panasonic Groups goal is producing eco-friendly products. Energy conservation By pursuing energy conservation, we provide our customers with products that support the reduction of CO₂ emissions. Resource conservation To promote resource recycling, we reduce the consumption of new resources. Products are made using recycled resources collected from used products. Indoor lighting levels Visit our website for more information. Chemical substances Panasonic products conform to the global standards of the RoHS Directives, which regulate the use of specific environmental load substances. *Lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants Panasonic Eco Solutions Amorton, Co., Ltd. Sales Planning Division, Project Planning Department Tokyo Sky Tree, East Tower 20F 1-1-2, Oshiage, Sumida Ward, Tokyo Zip code: 131-0045 No part of this publication may be photocopied without consent.