TG63-150
TG63-150
- Testing Capabilities: Supports dynamic tests with different beating systems (DPSH, DPH, DPM) and static tests with options for mechanical cone, piezocone (CPTU), and seismic piezocone (S-CPTU).
- Power and Efficiency: High power efficiency at 78%, with a hydraulic system operating at a maximum pressure of 240 bar.
- Mobility and Stability: Equipped with hydraulic powered tracks and stabilizers for operation on tilted surfaces, ensuring vertical positioning.
- Anchoring System: Features extensible augers for quick positioning and reduced negative forces on the frame.
- Engine Options: Available with a standard petrol engine or an optional diesel engine, both providing 18 Hp at 3600 rpm.
- Noise Level: Operates at a noise level of 105 dB (ISO 3746).
- Hydraulic System: Includes a heat exchanger with an air-oil electric fan and a cartridge filter with 25µm filtering capacity.
- Rubber Tracks: Hydrostatic with epicyclic reduction gear, capable of handling slopes up to 25% front and 10% side.
- Stabilizers: Three hydraulic stabilizers with articulated feet for enhanced stability.
- Emergency Equipment: Comes with a first aid kit and a fire extinguisher.
- CPT Tests: Maximum pull-down force of 150 kN and pull-up force of 160 kN, with a test speed of 2 cm/sec.
- DP Tests: Supports DPSH, DPH, and DPM tests with varying hammer weights and rod specifications.
- Dimensions vary slightly between petrol and diesel configurations, with a maximum length of 4600 mm and a weight range from 1000 kg to 1140 kg.
- Ground pressure ranges from 0.20 kg/cm² to 0.22 kg/cm².
Catalog excerpts
GEOTECHNICAL EQUIPMENT Static and/or dynamic tests in one equipment. B4QINI GEOTECHNICAL EQUIPMENT Pagani Geotechnical Equipment Localita Campogrande - 29010 Calendasco (Pc) - Tel +39 0523/771535 Fax +39 0523/773449 - Italia - e-mail: [email protected]
Open the catalog to page 1
Static and/or dynamic tests in one equipment. The penetrometer TG63-150 can be configured by request for dynamic penetrometric tests, static penetrometric tests, or both. As for dynamic tests, depending on the soils mainly examined, the penetrometer can be equipped with different beating systems (Super heavy DPSH, Heavy – DPH or Medium – DPM). It allows also to take adjusted or limited trouble samples which enable a better interpretation of the measurements. The TG63 stand out for its very high power efficiency (78%). Verticality is guaranteed during penetration of the rods and of any further...
Open the catalog to page 2
CPT tests Max pull-down force (kN) - (kilopound) 150 - 15296 Max pull-up force (kN) - (kilopound) 160 - 16315 Test speed (cm/sec) - (foot/sec) 2 - 0.065 Selector for CPT tests with load cell and manual data acquisition electronic card Max pull-down force measured by the load cell (kN) - (kilo-pound) 150 - 15296 Electric system Battery N°1 - 12V - 35Ah - 300A - no maintenance required Battery disconnector Hand controlled Hydraulic system DP tests The following tests can be carried out: Starting Power (Hp) - (Kw) Displacement (cm3) - (inch3) Torque (kgm) - (inch-pound) - (Nm) Air...
Open the catalog to page 3
Penetrometer use and maintenance manual, engine use and maintenance manual, certificate folder, software use manual Some engraved aluminium plates identifying the functions of the hydraulic levers are riveted onto the frame. The electric controls on the operator panel are identified by engravings on the panel Pagani Geotechnical Equipment Localita Campogrande - 29010 Calendasco (Pc) - Tel +39 0523/771535 Fax +39 0523/773449 - Italia - e-mail: [email protected] Non-binding data, subject to modifications. Pictures may differ from the standard version. Equipment may be different depending...
Open the catalog to page 4All Pagani catalogs and technical brochures
DPM306 Pages
TG63-15010 Pages
TG63-10010 Pages
TG 73-20010 Pages
TGAS-084 Pages
PIEZOCONE mk4 Pages
SEISMIC MODULE S3X6 Pages
TG63-1004 Pages
TG 30-204 Pages
DPM303 Pages