DPM30
3Pages

Dynamic penetrometric tests in portable equipment. Pagani Geotechnical Equipment Località Campogrande – 29010 Calendasco (Pc) – Tel +39 0523/771535 Fax +39 0523/773449 – Italia – e-mail: info@pagani-geotechnic

Dynamic penetrometric tests in portable equipment. DPM30 penetrometer enables us to carry out penetrometric tests exclusively of dynamic continuous type. For the dynamic tests, the penetrometer is fitted with a beating system consisting of a hammer of 30 kgs (66 pounds) and a stroke of 200 mm (7.87 inches), activated by a hydraulic motor. To drive it there is a motor-pump unit, where the motor might be petrol or electric (220v or 110v). For pulling out rod, casing tubes and samplers a hydraulic extractor is used. The penetrometer is controlled by a pedal distributor. The hydraulic...

It is possible to carry out the dynamic tests with following values: Hammer Stroke Rods 30 kg 66 pound 200 mm 7.87 inch Ø20 mm 0.79 inch Hydraulic extractor colour Motor pump control unit case treatment Documentation Petrol engine Type Starting Power (Hp) – (Kw) 3 3 Displacement (cm ) – (inch ) Torque (kgm) – (inch-pound) – (Nm) Air filter Consumption liters/h – (US gallon/h) 4-time mono-cylinder, unleaded petrol supply, pressurised air cooling, exhaust emission satisfying EC directives 97/68 and 2002/88, silencer Pull-crank ignition 3,5 – 2.6 at 3600 rpm 148 – 9.03 0.70 – 60.8 – 6.85 at...