colorgard™ snow retention systems S-5! ColorGard (8’ sections, prepunched for bolting) s/s bolt and washer (included) (mounting hole for horizontal seam application) prefinished color strip (from roof mat’l) S-5! utility clamp s/s set screws panel seam slope Petersen Aluminum Corporation is stocking the patented ColorGard Snow Retention System. ColorGard is the only product available which will perfectly match the color of the roof. ColorGard achieves this by utilizing a strip of the actual roof material, which is then mounted directly into ColorGard for a perfect match. This strip can be cut in the field or at our factory. An architectural alternative to ColorGard is SnoFence, which uses posts and continuous rods. prefinished color strip (from roof mat’l) ColorGard utilizes the patented S-5 Clamp for its strength. The S-5 technology (8’ sections, prepunched fo s/s bolt and washer involves gripping the seam in such a way that there is no penetration to the panel material. S-5 utilizes round-point set screws for attachment which are specially made for the S-5 ColorGard or SnoFenceTM Snow Retention System. panel seam (mounting These systems eliminate minimum temperature installation requirements and messy adhesives to apply. ColorGard and SnoFence can be installed at any temperature. For more information regarding ColorGard or SnoFence please contact your local Petersen representative. prefinished color strip (from roof mat’l) s/s set (8’ sections, prepunched for bolting)screws s/s bolt and washer (included) panel seam (mounting hole for horizontal seam application) prefinished color strip (from roof mat’l)