GLOBAL LP OUT
24Pages

GLOBAL LP OUT Flat roof outdoor mounted ventilation unit with plate heat exchanger - TAC6 Ventilation unit with plate heat exchanger for commercial applications. Well-suited for both newly constructed buildings and renovation projects Available in 2 sizes : LP OUT 08 ( 1420 m³/h) and LP OUT 10 (1800 m³/h) Temperature efficiency: up to 85 % For installation outdoors/indoors : flat roof / on the ground Premium control technique with touchscreen HMI

THE MOST IMPORTANT POINTS DOUBLE FLOW HIGH PERFORMANCE VENTILATION UNITS Given that each project has unique parameters and caters for different requirements, it follows that there can be no universal, ‘one-size-fits-all’ unit. This is why Swegon offers an unrivalled range of air handling units. Whether your project is large-scale or small-scale, whether it calls for basic or advanced products, whether the expectations regarding sound levels or space efficiency are tough to meet, we have a solution to match your requirements. In other words, we have the perfect unit for your project. The...

CONTROL OPTIONS AVAILABLE OPTIONS Internal electrical post heating coil (KWout) Internal electrical pre heating coil (KWin) Internal water post heating coil (IBA) Exteral post heating/cooling coil (EBA) Motorised dampers (CT) Flexible sleeve 20mm (MS20) BACnet gateway

L2 / D1. High efficiency plate heat exchanger with Eurovent certification. Integrated pre- and post heating coil; electrical or water based. Fully integrated modulating capacity control. Innovative touchscreen interface with intuitive commissioning menu and integrated contextual aid. EC plug fans with composite blades for optimised efficiency and low noise levels. Aluminum fan blades available as an option. Easy access for maintenance. The unit can be opened without moving the roof and can be done by only one technician. RAL7016 galvanized steel sheet construction with 30mm mineral wool...

Flexible for a wide variety of solutions THE CORRECT OPERATING MODE IS AN IMPORTANT FACTOR AIRFLOW OR PRESSURE Whether the ventilation system is operated on the basis of constant pressure or constant airflow or via a 0–10V control system depends on the area of application and the specific on-site requirements. The integrated master/slave control system ensures that operation is always well-balanced. THE ADVANTAGES IN DETAIL Sufficiently high external pressure Constant airflow Demand control: constant airflow controlled by a 0–10 V signal Constant pressure via an external pressure sensor...

Unit overview OPTIONAL CONTROL MODULES Touchscreen REMOTE CONTROL Remote control with touchscreen display and integrated timer with 4 actions per day and ‘off day’ functionality. For configuring and controlling the operation of 1 heat recovery unit. The comissing menu, alarm history and maintenance menu are all of them focussed on efficient operation. 4 POSITION SWITCH With the four position switch, a unit can be switched to one its three configurable operating speeds and the off-position. SAT MODBUS Interface for configuration, visual display and controlling the operation via MODBUS RTU...

EC PLUG FAN WITH COMPOSITE FAN BLADES (ALUMINUM BLADES OPTIONAL) INTEGRATED CONTROLLER PREHEATING COIL (OPTION) HIGH EFFICIENCY PLATE HEAT EXCHANGER INTEGRATED POST HEATING -WATER/ ELECTRICAL (OPTION) STAINLESS STEEL DRAIN PAN ADDITIONAL FEET 205MM (ACCESSORY) PROTECTION COVER

UNIT OVERVIEW GENERAL DESCRIPTION GLOBAL LP OUT EC FANS WITH COMPOSITE FAN BLADE As standard, the EC fans are equipped with composite fan blades. Optionally, aluminum fan blades are available. The advantage of the composite fan blades are lower weight and aerodynamical shaping of the blades. All of this is finally resulting in a better SFP value. The fans are physically located on the cold air side of the plate heat exchanger, thus drastically reducing the emitted noise levels toward the occupied rooms in the building. CIRCULAR DUCT CONNECTIONS RECTANGULAR DUCT CONNECTIONS The duct...

ANTI FROST STRATEGY Different antifreeze protection strategies are available for units with counterflow heat exchanger. - Supply airflow reduction - Bypass modulation - Internal electrical preheating coil The hand-held user interface is a 4.3” touchscreen and is very user friendly. The HMI is rendering on-site commissioning intuitive and simple by means of the commissioning menu. The HMI is equipped with a 2 meter long connection cable and magnets. By means of the magnets, the HMI can be easily fixed on to any metallic surface. DEFROST STRATEGY When the unit is used in cold climate...

Thermal efficiency (%) Available external pressure (Pa) GENERAL TECHNICAL SPECIFICATIONS • AIR VOLUME • POWER CONNECTION • RECOMMENDED FUSES • BAG FILTER FILTER CLASS EN16890 • DUCT CONNECTIONS SUPPLY/EXHAUST • DUCT CONNECTIONS EXTRACT/OUTDOOR • OPERATING RANGE ABSORBED POWER T° AFTER HEAT EXCHANGER SOUND PRESSURE Conditions : 1. All values at 200Pa external pressure. 2. T° after heat exchanger at -10°C, 90%RH and +22°C, 50% HR. 3. Thermal efficiency at -10°C, 90%RH and +22°C, 50% HR. 4.Sound pressure for ducted unit in free field conditions at 3m. 5. All data for composite fans variant...

GLOBAL LP OUT 08 Série GLOBAL LP OUT : dimensions Right hand version Left hand version

Thermal efficiency (%) Available external pressure (Pa) GENERAL TECHNICAL SPECIFICATIONS • AIR VOLUME • POWER CONNECTION • RECOMMENDED FUSES • BAG FILTER FILTER CLASS EN16890 • DUCT CONNECTIONS SUPPLY/EXHAUST • DUCT CONNECTIONS EXTRACT/OUTDOOR • OPERATING RANGE ABSORBED POWER T° AFTER HEAT EXCHANGER SOUND PRESSURE Conditions : 1. All values at 200Pa external pressure. 2. T° after heat exchanger at -10°C, 90%RH and +22°C, 50% HR. 3. Thermal efficiency at -10°C, 90%RH and +22°C, 50% HR. 4.Sound pressure for ducted unit in free field conditions at 3m. 5. All data for composite fans variant...