Group: Otlav
Catalog excerpts
MODULARB,Qj^PflrP/WP FLEXIBILITY. Unlike the standard hinge drilling systems, with MODULAR ROD, thanks to the device which can lodge two or three special tools that permit the separate door and frame drilling for the subsequent hinge fitting, it is not necessary to place the door on the frame; so that it is possible to prepare two separate lines to produce the doors, that is to say one for producing the shutters and one for the frames. The special symmetric shape of the jig and the reversible stop ensure the same rod can be used both for doors and frames whether left or right. The use of the shims finally permits to adapt the jigs in case it would be necessary to increase or decrease the drilling distances respect to door or frame. The MODULAR rod jigs are customized according to the kind of frame, to the type of hinge, to the position and angle of the pins as to the door or frame.
Open the catalog to page 11 • The modular construction permits to use the same jigs, by replacing only the blocks, to fix different kinds of Otlav hinges. 2* The millimetric rod allows the correct positioning of the jigs on the frames and on the doors. 3 • Duly adjusted, the reversible stop permits to position the rod always with a micrometric precision, in different times both on the frames and on the doors. 4 • The first, easy action to drill the frame, is the correct reversible stop Positioning on the frame reference. 5 • Successively proceed by drilling the frame. 6 • As for the door the process is the same, the...
Open the catalog to page 2Page 224 General Catalog MODULARWfO WO Code Description Pcs Price per Piece MU8XXXXXXXXX Customized jig for installation of OTLAV hinges equipped with: 1 On demand millimeter rod, reversible stop, 3 drilling jigs and if needed shims PP160020ZN04. For inquiries you are requested to forward the dimensioned technical drawing of shutter and frame as per sketch here below. A: Light between frame and door. B: First interior frame rabbet. C: Overlapping shim between door and frame. D: Overlapping between door and frame. E: Drilling angle for female pin. F: Axis position male hinge...
Open the catalog to page 3All OTLAV catalogs and technical brochures
-
THE WORLD OF PVC
30 Pages
-
The Pure Force of Steel
2 Pages
-
PVC
12 Pages
-
ADJUSTABLE 3D
19 Pages
-
ROLLACTA
2 Pages
-
INVISACTA
28 Pages
-
PVC CATALOGUE 2018
77 Pages
-
CATALOGUE 2018
252 Pages