Group: Otlav
Catalog excerpts
The wide range of concealed hinges
Open the catalog to page 1WARNING! INSTALLATION DEVICE PROTECTED BY PATENT Only (by) using INVISACTA, you can avoid to cut the cover strips (in green), thanks to the only 21 mm depth of the hull on the frame side , and at the same time install the hinge in the middle of the door thickness making the door become both left and right, that means reversible There are unoriginal INVISACTA hinges on the market; that don’t have the license to Producing doors as shown herein, with unoriginal INVISACTA hinges, means to make an injury to OTLAV patent rights, injury which is punishable both European Patent EP-B-2719851 ©2015 -...
Open the catalog to page 2Since 1956, thanks to our hinges, more than 1,000,000,000 doors are moving in 80 countries all over the world.
Open the catalog to page 3OTLAV S.p.A produces and sells hinges for doors and windows and other accessories for frames. Founded in 1956 by entrepreneur Angelo Padovan, Otlav has produced more than 2,2 billion of hinges since 1956. Thanks to almost 100 filed patents, Otlav ensures high quality standards and is present with its wide range of products in more than 80 countries worldwide. OTLAV new factory was inaugurated in 2007, in Via Angelo Padovan 2 in Santa Lucia di Piave (TV), in an area of45,000 square meters, 19,500 ofwhich are covered. Following the opening of the first office in March 1956, OTLAV has nowadays...
Open the catalog to page 4EC Certificates and Performance Declarations Tests on the hinges are also carried out at external bodies able to certify that the company manufactures according to rigid, systematically monitored production plans and that the products pass the tests envisaged by the standard UNI EN 1935/2004: they are thereby able to issue, if needed, the EC certificate or certify the data provided by OTLAV in the "performance declarations".
Open the catalog to page 5Technical data Capacity* Hinge height Width shutter side Depth adjustment Width frame side Depth shutter side Depth frame side 'Tested with 90x210 cm doors equipped with two hinges. For more information on the number of hinges to be used according to the weight and dimension of the door, please see the loading charts available on the website www.otlav.it. Door opening angle
Open the catalog to page 6Finishing IN310190V703 Satinized Silver Plated • Movement on 7 junction fulcrums equipped with bearing in plastic HT with high resistance and long life. • Equipped with 3-way adjustments that can be settled by means of just one 4 mm hex-spanner. Once installed, the door has natural sinking, Invisacta hinge allows to set the door back to the start position. • The hinge can be fitted with door closing devices. • Outer casings protect the inner junction fulcrums against rubble coming from door installation works. • The clamping screws, placed in the outer casings, are not used for hinge...
Open the catalog to page 7Width shutter side 32 mm Width frame side 25 mm Depth shutter side 53 mm Depth frame side 31mm Door opening angle 180° Depth adjustment ± 1 mm Tested with 90x210 cm doors equipped with two hinges. For more information on the number of hinges to be used according to the weight and dimension of the door, please see the loading charts available on the website www.otlav.it.
Open the catalog to page 8Finishing IN570130V702 Satinized Silver Plated IN570130VN02 Satinized Nickel Plated • The hinge is suitable to be installed on doors where frame is recessed to accept application of wall board to match. • Materialofcasing:zamak. • Materialoflevers:aluminum. • The hinge is reversible, if mounted in the center of the door thickness, allow the reversibility of the door, thus enabling the optimization of the stock and logistics at installation. • Movement on 7 junction fulcrums equipped with bearing in plastic HT with high resistance and long life. • Equipped with 3-way adjustments that can be...
Open the catalog to page 9Width shutter side 30 mm Width frame side 30 mm Depth shutter side 30 mm Depth frame side 21 mm Door opening angle 180° Side adjustment ± 1 mm Height adjustment ± 2 mm Depth adjustment ± 1 mm Tested with 90x210 cm doors equipped with two hinges. For more information on the number of hinges to be used according to the weight and dimension of the door, please see the loading charts available on the website www.otlav.it.
Open the catalog to page 10Finishing Hinge IN303120V702 Caps GC300010J102 Satinized Silver Plated • The hinge is reversible, if mounted in the center of the door thickness, allow the reversibility of the door, thus enabling the optimization of the stock and logistics at installation. • Movement on 7 junction fulcrums equipped with bearing in plastic HT with high resistance and long life. • Equipped with 3-way adjustments that can be settled by means of just one 3 mm hex-spanner. Once installed, the door has natural sinking, Invisacta hinge allows to set the door back to the start position. • Outer casings protect the...
Open the catalog to page 11Width shutter side 30 mm Width frame side 30 mm Depth shutter side 30 mm Depth frame side 21 mm Door opening angle 180° Side adjustment ± 1 mm Height adjustment ± 2 mm Depth adjustment ± 1 mm Tested with 90x210 cm doors equipped with two hinges. For more information on the number of hinges to be used according to the weight and dimension of the door, please see the loading charts available on the website www.otlav.it.
Open the catalog to page 12Finishing • The hinge is reversible, if mounted in the center of the door thickness, allow the reversibility of the door, thus enabling the optimization of the stock and logistics at installation. • Movement on 7 junction fulcrums equipped with bearing in plastic HT with high resistance and long life. • Equipped with 3-way adjustments that can be settled by means of just one 3 mm hex-spanner. Once installed, the door has natural sinking, Invisacta hinge allows to set the door back to the start position. • Material of hinge: zamak. • The hinge can be fitted with door closing devices. • Outer...
Open the catalog to page 13All OTLAV catalogs and technical brochures
-
THE WORLD OF PVC
30 Pages
-
The Pure Force of Steel
2 Pages
-
PVC
12 Pages
-
ADJUSTABLE 3D
19 Pages
-
ROLLACTA
2 Pages
-
PVC CATALOGUE 2018
77 Pages
-
CATALOGUE 2018
252 Pages