video corpo

MINI RM5

MINI RM5

MINI RM5

Product catalog summary
Product Overview:
The OSO MINI RM5 is a stainless steel unvented water heater designed for point-of-use applications. It features a 3kW heating element and a 5-litre capacity, capable of heating water from cold in under 6 minutes. The unit can be mounted either vertically or horizontally, with a vertical mounting bracket included in the casing and a wall mounting bracket supplied.

Specifications:
  • 10-year guarantee.
  • Maximum operating pressure: 10 bar.
  • Thermostat adjustable between 30°C and 60°C.
  • Hot outlet and cold feed connections: 15mm stainless steel.
  • Inner vessel tested to 16 bar and made of corrosion-resistant stainless steel.
  • No sacrificial anode required.

Installation Guidelines:
  • If a check valve is used in the cold main, an expansion vessel of 0.2 litres must be incorporated and charged to mains pressure.
  • Hot and cold water connections must be oriented upwards.
  • Horizontal fitting provides more hot water.

Design Features:
  • Superior smooth epoxy-coated white finish.
  • Easy installation with factory-fitted components.
  • Includes a factory-fitted surface-mounted thermostat with a high-limit feature.
  • Factory-fitted hard wiring between element and thermostat.

Safety Recommendations:
It is advisable to fit an inline fail-safe temperature limiting valve as the unit delivers hot water above 40°C.

Contact Information:
OSO Hotwater (UK) Limited, E15 Marquis Court, Team Valley Trading Estate, Gateshead, Tyne & Wear, NE11 0RU. Tel: (0191) 482 0800, Fax: (0191) 491 3655, Email: [email protected], [email protected], [email protected], Web: www.oso-hotwater.com
See more

Catalog excerpts

MINI RM5-1

- builds water heaters for the future HOT WATER WHERE YOU NEED IT WHEN YOU NEED IT THE OSO MINI RM5 STAINLESS STEEL UNVENTED WATER HEATER FOR POINT OF USE APPLICATIONS The OSO MINI RM5 incorporates a 3kW element and has a capacity of 5 litres.The MINI RM5 heats from cold in less than 6 minutes, and can be mounted vertically or horizontally. A vertical mounting bracket is incorporated in the outer casing and a wall mounting bracket is supplied with each cylinder. OSO MINI RM5 10 Year Guarantee

 Open the catalog to page 1
MINI RM5-2

TYPICAL INSTALLATION N.B. If a check valve is incorporated in the cold main to the OSO MINI an expansion vessel of 0.2 litres capacity must be incorporated in the cold supply and be charged to mains pressure. The maximum operating pressure of the OSO MINI is 10 bar.The thermostat is adjustable between 30°C & 60°C. Hot outlet and cold feed connections are 15mm stainless steel. 430 Hot Water Ø 15 Cold Water Ø 15 Horizontal On the wall with supplied bracket, or on the floor. Warning: Hot and cold water connections must be pointing up! Cold Water Hot Water to taps • Superior smooth epoxy coated white...

 Open the catalog to page 2

All OSO Hotwater catalogs and technical brochures

Archived catalogs

  1. 15 SERIES

    2  Pages

  2. 21 SERIES

    2  Pages

  3. SUPER S

    4  Pages

  4. DUALSTREAM

    6  Pages

  5. 20 SERIES

    4  Pages

  6. 17 SERIES

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.