WOOD FINISHES 2019
52Pages

WOOD FINISHES KNOWLEDGE AND ADVICE

ABOUT OSMO - WOOD MEETS COLOUR 4 - 7 Our wood finishes - the advantages at a glance 4 One system combining all advantages 5 Other systems in comparison 5 Wood needs care and protection 6 The application - easy and sure 7 Sanding Sequences for Oiled Surfaces 12-13 Polyx®-Oil Effect Natural 14 Polyx®-Oil Anti-Slip/Anti-Slip Extra 15 Hardener for Polyx®-Oil Express 16 Wood Wax Finish Clear Extra Thin 17 Polyx®-Oil Effect Silver / Gold 18 Recommendations for wood species 20

Garden Furniture Maintenance Kit 34 UV-Protection Oil/ UV-Protection Oil Extra 35 Natural Oil Woodstain Effect 37 One Coat Only HSPLUS 37 Opaque Gloss Wood Stain 39 Polymer Composite Cleaner 40 Wood Reviver Power-Gel 41 Decking and Flooring Cleaning Machine 47 Floor Brush with Handle 48 Pad Holder with joint 48 Decking Cleaning Brush with Handle 49 Decking Brush with Handle 49 Double Blade Scraper 50 Brush Cleaner and Thinner 50

OUR WOOD FINISHES – THE ADVANTAGES AT A GLANCE SIMPLE APPLICATION > Oils fill the pores of wood and protect against waterlogging, which damages wood. However they do not form an impermeable film. Wood stays microporous and continues to absorb and release water without any damage. > Microporous wood can breathe and improves air quality. Due to its anti-static properties, it is very good for allergy sufferers. NATURAL INGREDIENTS > All Osmo wood finishes are based on oils and waxes: sunflower oil, carnauba and candelila waxes, linseed, soya and thistle oils. > Oils retain the value of the...

ONE SYSTEM, ALL ADVANTAGES COMBINED OIL AND WAX-BASED FINISHING SYSTEM ÖL- UND WACHSBASIERENDES >> Protects the wood from the inside ANSTRICHSYSTEM >> Does not form a film innen und außen >> Schützt das Holz von >> Forms a filmbildend microporous surface >> Ist nicht protective, >> ildet eine schützende, offenporige Oberfläche B Advantages Vorteile > er finish penetrates das Holz ein und >> The Anstrich dringt in deeply into wood and D protects the surface liegt auf der Holzoberfläche auf > Enhances the natural wood colour >> Feuert das Holz an > Spot repairs can be carried out easily >>...

SO THE JOYS OF WOOD LAST A LONG TIME BENEFIT FROM OUR ADVICE UV RADIATION Over the course of time, natural UV radiation in sunlight greys wood and makes it brittle. MOISTURE / WATERLOGGING In outdoor areas, water facilitates wood decay and in indoor areas it causes unslightly spots. ALGAE AND FUNGAL ATTACK These micro-organisms form dark spots and can eventually destroy wood substance. WOOD-DESTROYING INSECTS They feed on wood and damage the substance. FILM-FORMING FINISHES They lock moisture into wood. Before recoating they must be removed through time-consuming sanding works. Wood treated...

THE APPLICATION – EASY AND SURE HIGH COVERAGE >> High content of pigments >> High content of oil >> Finished with the first or second coat - without any primer >> A thin coat is sufficient RECOATABILITY Advantages for indoor areas > Spot repairs are carried out by sanding off the surface and recoating with Polyx®-Oil: for scuff marks, deep scratches or general damage. Advantages for outdoor areas > Osmo wood finishes do not peel, instead they weather away over the course of time. Therefore it is possible to recoat without any sanding beforehand. SURFACE PREPARATION > Completely sand off...

COLOUR & PROTECTION FOR THE INTERIOR

Colour creates a good atmosphere in every room: in the office, bedroom or dining room.

COLOUR & PROTECTION FOR THE INTERIOR POLYX®-OIL ORIGINAL (Page 14) POLYX®-OIL EFFECT NATURAL (Page 14) POLYX®-OIL RAPID (Page 15) Rapid POLYX®-OIL EXPRESS (Page 16) HARDENER FOR POLYX®-OIL EXPRESS (Page 16) POLYX®-OIL 2K PURE (Page 17) WOOD WAX FINISH CLEAR EXTRA THIN (Page 17) POLYX®-OIL TINTS (Page 18) POLYX®-OIL EFFECT SILVER / GOLD (Page 18) POLYX®-OIL ANTI-SLIP / ANTI-SLIP EXTRA (Page 14) HARDENER FOR OIL STAIN (Page 19) WOOD WAX FINISH (Page 22 – 23) INTENSIVE CLEANER (Page 27) LIQUID WAX CLEANER (Page 26) WASH AND CARE (Page 27) MAINTENANCE KIT FOR FLOORS (Page 26) SPRAY CLEANER (

PRODUCT FINDER FURNITURE / WALLS / CEILINGS WOOD WAX FINISH CLEAR EXTRA THIN (Page 17) POLYX®-OIL EFFECT SILVER / GOLD (Page 18) WOOD WAX FINISH (Page 22 – 23) WOOD PROTECTOR (Page 24) UVIWAX® UV-PROTECTION (Page 25)

New installation / Renovation 4' Pre-sanding with belt grinder up to G 60 G 60 crosswise G 80 4^ Joint filling G 80 G 120 New installation with minimal over/under wood G 40* G 60* G 80 4^ Joint filling T G 80 G 120 LC * Depending on the condition of the wood flooring, start with one of these grits. Important > For an ideal surface, sanding screen must be used for the final sanding step. The grit of the sanding screen must be the same as the grit used for the sanding discs in the previous step. > Directly before starting each work step, thoroughly vacuum the floor and expansion gap. Check...

SAND WOOD FLOORING WITH AN EDGE SANDER A Large differences in height between the individual wood elements. B Small differences in height between the individual wood elements. C Thick finish layer, large amount of dirt and stains or deep scratches. D Thin finish layer, normal amount of dirt and stains or scratches. Important To keep the transition area between the edge and the remaining field area from being noticeable, the following sanding step sequence has to be maintained: For the field sanding with a drum or belt sanding machine and the for the subsequent sanding step with the edge...

Colour code MANUAL PROCESSING Finished surface in 2 days, 2 coats 1. First coat on the raw, sanded wood approx. 35 ml/m2. 2. Mistakes in the wet coating can be corrected up to 30 minutes after the first application. 3. Drying time approx. 8 - 10 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation. 4. If desired, the dried finish can be smoothened with fine grain sandpaper (P400) or with a Scotchpad before applying the second coat. 5. Second coat approx. 35 ml/m2. 6. Drying time approx....