Orenco Full Product
102Pages

Call OrenCO SyStemS® at 800-348-9843 Or 541-459-4449 • fax: 541-459-2884 IntroductIon — Page I IntroductIon Darren A. Simmie To Our Customers Thank you for giving us the opportunity to show you some of the thousands of products that we design and manufacture for onsite and decentralized wastewater treatment systems. Our company offers treatment solutions for all types of properties: residential and commercial, small flows and large flows, household-strength waste and high-strength waste, poor soils and high groundwater. Whether you need a single item or a complete system package, we’re...

for a Distributor Page II — IntroductIon near you, visit us online at WWW.orenCo.CoM IntroductIon How To Use This Catalog About Orenco You can find products* in this catalog in three ways: • Table of Contents (organized by product family) • Alphabetical Index (page 85) • Model Code Index (page 89) There is also an Index of Tables and Figures (page 91). What’s new This year’s Product Catalog includes several new products: our BT-VCOM software and Bluetooth kit (page 51), for servicing VeriComm® control panels; our External Splice Box (page 26), which saves space in risers; our Riser...

for a Distributor Page Iv — table of contents near you, visit us online at WWW.orenCo.CoM table of contents

Call OrenCO SyStemS® at 800-348-9843 • fax: 541-459-2884 tanks, rIsers, lIds, and accessorIes — Page 1 tanks, rIsers, lIds, and accessorIes Orenco Fiberglass Tanks • 100% watertight, water-tested • Light enough to carry in a small utility trailer • Built-in lifting brackets allow easy installation with a backhoe • Made of fiberglass for strength and durability • Designed for four-foot burial when empty • Allows placement of baffle wall in any location • Injection-molded for excellent and consistent part quality • Optimized for use with Orenco’s pump packages • IAPMO approved The septic tank...

for a Distributor Page 2 — tanks, rIsers, lIds, and accessorIes near you, visit us online at WWW.orenCo.CoM tanks, rIsers, lIds, and accessorIes Orenco Fiberglass Tanks (T) Fully Assembled Tanks Orenco’s injection-molded, watertight tanks have been optimized for use in onsite wastewater collection and treatment systems (residential and commercial) and in communitywide effluent sewer systems. Tanks are made of fiberglass-reinforced polyester for durability, and injection-molded for unmatched part quality and consistency. Two sizes are available: 1000-gallon and 1500-gallon. Baffles can be...

Call OrenCO SyStemS® at 800-348-9843 • fax: 541-459-2884 tanks, rIsers, lIds, and accessorIes — Page 3 tanks, rIsers, lIds, and accessorIes Risers and Riser Pipe (RR, RU) Discharge grommet: 10 = 1" 12 = 1-1/4" 15 = 1-1/2" 20 = 2" Ribbed riser Riser diameter: 24", 30" Riser height (inches) RR + + Splice box: S = 1" grommet installed (for Orenco SB1 - SB4 splice boxes) L = 1-1/4" grommet installed (for Orenco SB5, SB6 splice boxes) S1 = SB1 attached S2 = SB2 attached S3 = SB3 attached S4 = SB4 attached L5 = SB5 attached L6 = SB6 attached SX = hole for SBEX (external splice box) * 24-in....

for a Distributor Page 4 — tanks, rIsers, lIds, and accessorIes near you, visit us online at WWW.orenCo.CoM tanks, rIsers, lIds, and accessorIes Lids (FL) Large Lids Orenco fiberglass lids provide a secure covering for access risers and are capable of supporting a 2500- lb wheel load. On gasketed models, polyurethane, neoprene, or EPDM gaskets ensure a watertight seal. Comes standard with stainless steel Allen head bolts and Allen wrench. May specify special “pinned” (tamper- proof) stainless steel bolts for a higher level of protection. (See Lid Bolts and Wrench on page 9.) Lids are molded...

Call OrenCO SyStemS® at 800-348-9843 • fax: 541-459-2884 tanks, rIsers, lIds, and accessorIes — Page 5 tanks, rIsers, lIds, and accessorIes Riser Tank Adapters and Bolt-down Kits (FRTA, PRTA, RRFTA) Orenco tank adapters provide a structural, watertight method of installing an access riser over a tank opening. Constructed of ABS plastic or fiberglass, adapters can be cast into the top of a concrete tank, bonded to the top of a fiberglass tank, or fastened with a bolt-down kit. See Adhesives (ADH) on page 6. FRTA30-FRP Riser Tank Adapters 30-in. fiberglass adapter made specifically for Orenco...

for a Distributor Page 6 — tanks, rIsers, lIds, and accessorIes near you, visit us online at WWW.orenCo.CoM tanks, rIsers, lIds, and accessorIes Adhesives (ADH) Adhesives aDh100 is a single-component adhesive/sealant for sealing pipe grommets and joining PVC or fiberglass risers to ABS or fiberglass PRTA-style tank adapters (where the joint is in shear). Handling strength is achieved within 12 hours; full cure in 2 to 3 days. It comes in a 10.2-oz cartridge tube for application with a caulking gun. aDh10 (IPS810) adhesive is a white, two-component, self-leveling methacrylate adhesive for...

Call OrenCO SyStemS® at 800-348-9843 • fax: 541-459-2884 tanks, rIsers, lIds, and accessorIes — Page 7 tanks, rIsers, lIds, and accessorIes Grommets (G) Orenco pipe grommets provide a watertight seal at piping penetrations. All grommets conform to standard IPS pipe sizes. Use with ADH100. nOmenclaTure hOw TO SelecT Step 1: For internal splice box grommets, determine the nipple size being used, either 1 in. or 1-1/4 in. SB1 through SB4 requires a 1-in. grommet. SB5 and SB6 require a 1-1/4-in. grommet. External splice boxes (SBEX) require a 4-in. grommet (grommet included with SBEX). Step 2:...

for a Distributor Page 8 — tanks, rIsers, lIds, and accessorIes near you, visit us online at WWW.orenCo.CoM tanks, rIsers, lIds, and accessorIes Grade Rings and Grade Ring Inserts (GR, GRI) TabLe 7. grade ring and grade ring inserT exampLes model code Description GR2403 PVC grade ring, 24-in. diameter with attached 3-in. riser GRI24 Grade ring insert for all standard 24-in. PVC ribbed pipe GRI24RLA RLA grade ring insert for 24-in. diameter access risers with existing riser-to-lid adapter (RLA) GRI30 Grade ring insert for all standard 30-in. PVC ribbed pipe GRI18 Grade ring insert for 18-in....