*myarchiexpo

PIE-1

Product catalog summary

Overview: The PIE-1 is a PoE IP Encoder designed to convert analog relay outputs into ASCII code, specifically the Redwall Event Code, for integration with Redwall and Fiber SenSys detectors. This enables connection to Video Management Software (VMS) platforms and control of IP cameras.

Key Features:

Converts analog signals to IP using Redwall Event Code.
Compatible with Power over Ethernet (PoE), compliant with IEEE802.3 af/at standards.
Reduces installation time and cost by requiring only one LAN cable.

Specifications:

Power Supply: PoE (IEEE802.3af/at compliant).
Power Output: 24 VDC 800 mA max, 12 VDC 50 mA max.
Signal Input: 5 inputs for dry contacts (Normally Closed only).
Alarm Output: Redwall Event Code (UDP/TCP).
Operating Temperature: -40 to +60˚C (-40 to +140˚F).
Operating Humidity: 95% RH max.
Dimensions: 67.5 mm x 94.7 mm x 33 mm (3.66” x 3.73” x 1.30”).
Weight: 270 g (8.8 oz including all parts), Main unit: 90 g (3.2 oz).
Supported Protocols: IPv4, ARP, UDP, TCP, ICMP, HTTP.

Installation and Accessories:

Includes power output cables, alarm input cables, installation instructions, mounting plate for a Double Gang Box, gasket sheet for Gang Box, and mounting screws.
Function settings can be adjusted via a web browser.

Applications: The PIE-1 is used to control IP cameras via VMS by generating event codes from detector inputs, allowing for actions such as repositioning cameras or starting recordings.

Certifications: The product is ISO 9001 and ISO 14001 certified, ensuring quality and environmental management standards.

Catalog excerpts

Quality detection system for video surveillance Unrivalled performance PIE-1 is an encoder that converts analog relay outputs to original ASCII code (Redwall Event Code) for Redwall and Fiber SenSys detectors. Detectors can be connected to Video Management Software platforms with PIE-1 and control IP cameras. PIE-1 is generating Redwall Event Code using the analog alarm inputs from the Redwall and Fiber SenSys detectors. Video Management Software receives the event code and sends a command to reposition to a pre-set and/or start recording with a PIE-1 is compatible with Power over Ethernet (PoE). IEEE802.3 af/at making it possible to supply power Only one LAN cable is needed to connect PIE-1 to a PoE hub or switch reducing your installation time and PIE-1 changes analog relay output signals (N.C.) to original ASCII code. • Compatible with Power over Ethernet PIE-1 can supply power to detector using a PoE hub or switch. Power output cable x2, Alarm input cable x3, Installation instruction, Mounting plate for a Double Gang Box. Gasket sheet for Gang Box, Mounting Screws x6 * Specifications and design are subject to change without prior notice.

Open the catalog to page 1

Control IP camera Via Video Management Software Video Management Software Redwall Event Code Redwall Event Code Redwall Event Code & PoE Redscan series Video Management Fiber sensys detector (1 or 2 channels model only) Unit: mm(inch) OPTEX CO., LTD. (ISO9001 Certified /ISO14001 Certified) 5-8-12 Ogoto, Otsu, Shiga, 520-0101 Japan OPTEX INCORPORATED (USA) http://www.optexamerica.com/ OPTEX (EUROPE) LTD. (UK) http://www.optex-europe.com/ OPTEX SECURITY SAS (FRANCE) http://www.optex-security.com/ OPTEX SECURITY Sp. Z O.O. (POLAND) http://www.optex.com.pl/

Open the catalog to page 2

All OPTEX Security catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list