Catalogs >
OPTEX Europe >
Visual Verification Bridge: CKB-304V2

Visual Verification Bridge: CKB-304V2
2Pages

Catalog excerpts

Visual Verification Bridge: CKB-304V2 - 1

Visual Verification Bridge: CKB-304V2 Powered by CHeKT The OPTEX Visual Verification Bridge links CCTV cameras to a monitored alarm panel, adding visual verification to the intruder alarm system. The Bridge is the hardware component of the OPTEX Intelligent Video Monitoring solution, powered by CHeKT, that provides a visual verification solution for Alarm Receiving Centres (ARCs), that is hosted in the Cloud. Connected to the control panel, the Bridge enables indoor and outdoor intrusion sensors, door contacts and panic buttons* to be linked with ONVIF cameras or DVRs, to map the detection or alarm zones to the associated cameras. Once installed, the Bridge can be registered to the ARC that monitors the site, and connected to the CHeKT Monitoring Portal. The alarm system can then become a responsive visual verification solution without any interference to the integrity. Features n Compact size and lightweight 4 Normally Open or Closed alarm inputs Arming and disarming Options Bind alarm detectors with Cameras Supports ONVIF Cameras and HD over coax recorders Line level output for remote talk-down capability Pair cameras with an existing alarm panel Programmable from a mobile app Launch cameras with your existing alarm signals in the central station Optional XML Integration for advanced supervision by the central station. When an alarm zone is triggered the operator is alerted in a few seconds. The CHeKT Monitoring Portal presents the operator with the live view of the zone that has been triggered, pre- and post event video recordings, and a site map with the location of additional cameras. Depending on the agreed procedure and the assessment of the alarm, the operator can either take immediate action or push the notification to a key holder or emergency contacts so they can verify the alarm and instruct the operator accordingly. All interactions are documented in an audit trail creating a comprehensive visual verification solution. *Monitoring panic buttons requires a different setting than monitoring detection sensors or door contacts, please consult us for more information. Gated access to Cloud (Compatible with any OPTEX or third party indoor and outdoor detection sensors, door sensor and panic alarm)

Open the catalog to page 1

Visual Verification Bridge: CKB-304V2 - 2

An OPTEX sensor is triggered by an intruder. The alarm signal is sent to the Alarm Receiving Centre and the OPTEX Bridge transmits the video to the CHeKT cloud via SSL. The alarm is delivered to the ARC. When the operator responds to the alarm, the CHeKT Monitoring Portal opens and provides footage of what caused the alarm and the live stream from the camera. For verification, the operator can send an SMS to the end-user containing a URL that directs them to the CCTV footage. The end-user can respond with either ‘DISPATCH’ or ‘DISREGARD’. The operator can see in real-time when the end-user...

Open the catalog to page 2