Wireless REDWALL PIR Detector With pre-fitted Luminite wireless transmitter and battery outdoor wireless detectors designed to cover to be used mainly where seamless integration with CCTV systems is required. These detectors are pre-fitted with a long life SAFT battery and a Luminite wireless radio-frequency (RF) an intelligent detection system that monitors ambient environment and automatically adjust the sensitivity. They are also equipped with anti-rotation, anti-masking functions in addition to the anti-tamper feature which provides further They can be used in conjunction with the (16 Channel Relay controller) or the LGMRU4X4 (Masthead+ 4 channel outputs), to form a complete radio-linked system. WALKTEST INSTRUMENT Receives either directly from MASTHEAD RECEIVER Receives data from the PIR's CONTROL INTERFACE • Pre-fitted with SAFT long life battery • Pre-fitted with the Luminite wireless transmitter, up to 800m transmission range (line of sight) • Intelligent PIR Detection System including automatic sensitivity management, advanced detection algorithm and three dual pyro-elements with Double Conductive shielding • Anti-vandalism functions including anti-masking and anti-rotation • Independent sensitivity selector for near/far areas • Detection logic selector • Detection range selector • Independent N.C. and N.O. ALARM output • Adjustable alarm interval time SIP-AT SIP Adjustment tools (includes AVF-1 Area view finder and AWT-3 Audible walk tester) AWT-3 Audible walk tester SIP-MINIHOOD Sun/Snow shield LGMRU 4X4 Masthead +4 channel Receiver LGRU16 8 channel Relay Controller

LGMT434 Masthead Receiver forms the heart of the Luminite Genesis wireless system by receiving alarm data from up to the LGRU16 control unit via an RS232 link. The Masthead can transmit data as well as receive it, which means it can transmit back to a walk test instrument (LGWT434) showing all received information as well as the signal strength received from each transmitter on the wireless network. In addition it can perform as a repeater for for systems that require greater transmission LGRU16 Relay control unit provides a physical alarm and tamper outputs from Receiver. Between one and four...