Quality detection system for video surveillance Unrivalled performance REDWALL WIRE FREE SYSTEM WIRELESS PIR's Up to 64 battery powered PIR's can transmit back to one Masthead (transmission range at least 1 km) WALK TEST INSTRUMENT Receives either directly from MASTHEAD RECEIVER Receives data from the PIR's CONTROL INTERFACE Redwall battery powered wire free detectors into existing or newly installed wireless systems which sends the information Controller Interface WF-434T transmitter is designed to integrate with all Redwall battery powered wire free detectors. It transmits alarm and tamper information to existing or newly installed Luminite/Genesis wireless based systems up to a maximum line of sight (LOS) distance of up to 1 km from the Genesis Masthead Receiver unit (dependent on site conditions). LGMT434 Masthead Receiver forms the heart of the Genesis wireless system. It's purpose is to receive alarm data from up to 64 WF-434T transmitters and to pass it to the LGRU16 control unit via an RS232 link. The Masthead can transmit data as well as receive it, which means it can transmit back to a walk test instrument (LGWT434) showing all received information as well as the signal strength received from each transmitter on the wireless network. In addition it can perform as a repeater for systems that require greater transmission distances.

Quality detection system for video surveillance Unrivalled performance LGMRU4x4 is an alternative option to the LGMT434 which can be connected directly to the alarm presets of a dome camera. It can also be used to connect directly to DVRs/alarm systems where a small number of outputs are required. It has 8 relay outputs which can be used as 4 alarms plus 4 tampers or alternatively as 8 alarm outputs. Expansion cards are available to increase the number of alarm outputs to a maximum of 32. The expansion card is a LGREM4x4 which provides an additional 8 outputs (maximum of 3 per LGMRU4x4). LGRU16...