Network Photoelectric Detector The REDBEAM series consists of a short and long range photo beams, 60m, 100m and 250m, with a POE-IP encoder (PIE-1) which can be integrated with the security network and connected with Video Management Software platforms, to control IP cameras and better manage alarms. REDBEAM is a Quad High Power Beam that combines precise detection capability with increased reliablitiy, providing superior outdoor detection in a smart design. REDBEAM generates an original ASCII code (Redwall Event Code). Video Management Software receives the event code and sends a command to trigger a camera pre-set and/or start recording. REDBEAM is compatible with Power over Ethernet (PoE). IEEE802.3 af/at makes it possible to supply power using a PoE hub or switch. Only one LAN cable is needed to connect the PIE-1 to a hub or switch, reducing time and costs. • Sniper viewfinder with 2X magnification The new telescopic lens has a high level of visibility for optical alignment. •Vivid interior colour Easy-to-see vivid interior colour for optical alignment. • Alignment dial The alignment dials make adjustments easy, with no need ' IP65 water proof structure Rubber packing is used for all conceivable points where water or dust may penetrate, such as wiring holes, wire ports and the outer ' Quad beam with aspherical lenses The high-grade aspherical lens creates a more sharply defined and precise active infrared beam. ' Compatible with Power over Ethernet (PoE) REDBEAM can supply power to detector using a PoE hub or switch. ** Required power less than 12.95W, can use the PoE Hub. Required power less than 25.5W, can use the PoE Plus Hub. Specifications may be modified without prior notice.

REDBEAM series SYSTEM EXAMPLE Video Management Software Camera PoE hub or switch OPTIONS Anti Bird Cap ABC-4 Keep birds and small animals off the detector to reduce false alarms. Stop rain and snow streaming in front of the detector to maintain its sensitivity. Back Cover BC-4 Pole Side Cover PSC-4 Conceal the back side of pole-mounted detector. Conduit Bracket CBR-4 Conceal the gap between two pole mounted detectors in back to back. Heating unit HU-3 Bracket for connecting the conduit pipe. Patent pending Conceal the gap between two pole-mounted detectors in back to back. • Power input 24VAC/DC...