TL3011 - TL3031 SYSTEMS FOR FRAMELESS ALL-GLASS BALUSTRADES
16Pages

TL3011 - TL3031 SYSTEMS FOR FRAMELESS ALL-GLASS BALUSTRADES

Intelligent Advantage. The TL-3011 Y-profile – one of many intelligent applications by ONLEVEL which brings nothing but benefits. The height adjustment options make the installation a child´s play. Essential Features | Slimline, elegant design and low-maintenance | ONLEVEL FLEXFIT Glass Adjustment Tool | Extension pin holes | Drainage holes | Top Cover (optional) | Partial cover caps (optional) | For glass thicknesses between 12 - 21.52 mm As a matter of fact, the profile is suited both for interior and exterior applications. It can withstand a linear load of more 1.0 kN and is appropriate...

Enables concealed application Side mount

TL-3011 | 1.0 KN SIDE MOUNT Glass profile | Height: 208 mm | Width 50 mm | Sales unit: 1 piece Mill finish Plain aluminium | Side length inside: 150 mm | Side length outside: 200 mm | Sales unit: 1 piece Mill finish Plain aluminium Outside corner 90° | Side length inside: 150 mm | Side length outside: 200 mm | Sales unit: 1 piece Mill finish Plain aluminium End cap with cover strip, left | End cap only for low cover strip | For use on the left | Sales unit: 1 piece Plain aluminium Mill finish

TL-3011 | 1.0 KN SIDE MOUNT End cap with cover strip, right | End cap only for low cover strip | For use on the right | Sales unit: 1 piece Mill finish Plain aluminium End cap for staircase with cover strip, left | | | | End cap only for low cover strip For use on the left can be cut to size Sales unit: 1 piece Mill finish Plain aluminium End cap for staircase with cover strip, right | | | | End cap only for low cover strip For use on the right can be cut to size Sales unit: 1 piece Mill finish Plain aluminium Cover strip Cover for the lower part of the profile | Sales unit: 1 piece Mill...

TL-3011 | 1.0 KN SIDE MOUNT Cover strip Cover for the entire profile | Heigth: 216 mm | Sales unit: 1 piece Mill finish Plain aluminium Spacer plate | Thickness 10 mm | Sales unit: 1 piece Mounting block. | Required number per 2500 mm: 7 pieces | Sales unit: 8 pieces Plain aluminium Inner drill hole Extension pin. | Length: 40 mm | Diameter: Ø 6 mm | Sales unit: 8 pieces AISI 316 (inside & outside) Art. no. 90.7001.640.31

zinc-plated steel (inside) | Finish interior application: zinc-plated steel (inside) | Finish exterior application: V4A (exterior) | Required number per 2500 mm: 7 pieces | M10 | Suitable mortar: 91.3000.010.00 | Injection mortar (91.3000.010.00) is sufficient for ± 22 anchors | Sales unit: 10 pieces Fischer fixing anchor RG M10x190 Finish interior application: zinc-plated steel (inside) Finish exterior application: V4A (exterior) Required number per 2500 mm: 7 pieces M10 x 60 mm Sales unit: 7 pieces zinc-plated steel (inside) Finish interior application: zinc-plated steel (inside) Required...

TL-3011 | 1.0 KN SIDE MOUNT FLEXFIT 1.0 kN | | | | Fine adjustment of glass panes For glass thicknesses between 12 - 21.52 mm Adjustment of up to 34 mm in relation to the vertical axis Pay attention to the right glass thickness! Wedge colour Glass thickness

The Power of Improvement. The true muscle man among the all-glass balustrades. This is the profile which is most often used in highly frequented projects. No profile can be mounted faster. No profile requires less effort. Even strongest loads are no problem. Essential Features | Slimline, elegant design and low-maintenance | ONLEVEL FLEXFIT Glass Adjustment Tool | Extension pin holes | Drainage holes | Top Cover (optional) | Partial cover caps (optional) | Height adjustable | For glass thicknesses between 21.52 - 31.52 mm Like all profiles from ONLEVEL, TL-3031 can be used both in interior...

For highly frequented construction projects Side mount

TL-3031 | 3.0 KN SIDE MOUNT Glass profile | Height: 250 mm | Width 69 mm | Sales unit: 1 piece Plain aluminium Inside corner 90° | Side length inside: 131 mm | Side length outside: 200 mm | Sales unit: 1 piece | Side length inside: 131 mm | Side length outside: 200 mm | Sales unit: 1 piece End cap with cover strip, left | For use on the left | Sales unit: 1 piece Plain aluminium

TL-3031 | 3.0 KN SIDE MOUNT End cap with cover strip, right | For use on the right | Sales unit: 1 piece Plain aluminium Cover strip | Sales unit: 1 piece Plain aluminium Mounting block | Required number per 2500 mm: 10 pieces | Sales unit: 8 pieces Plain aluminium Inner drill hole Extension pin | Length: 40 mm | Diameter: Ø 6 mm | Sales unit: 8 pieces AISI 316 (inside & outside) Art. no. 90.7001.640.31

Finish interior application: zinc-plated steel (inside) Finish exterior application: V4A (exterior) Required number per 2500 mm: 10 pieces M10 Suitable mortar: 91.3000.010.00 Injection mortar (91.3000.010.00) is sufficient for ± 22 anchors Sales unit: 10 pieces zinc-plated steel (inside) Fischer fixing anchor RG M10x190 Finish interior application: zinc-plated steel (inside) Finish exterior application: V4A (exterior) Required number per 2500 mm: 10 pieces M10 x 60 mm Sales unit: 10 pieces zinc-plated steel (inside) Fine adjustment of glass panes For glass thicknesses between 21.52 - 31.52...

HEIGHT ADJUSTABLE MOUNTING BLOCK. The Steady and Flexible Body. We wouldn´t be ONLEVEL, if we didn´t work permanently for the further development of our products: We have enabled a more significant compensation of construction and mounting tolerances by taking optimum advantage of the opportunities provided by aluminium extrusions. Therefore, the drill hole for fixing our glass support profiles does not need to be completely accurate any more, but has a tolerance of approx. 5 mm in each direction. In order to guarantee that the glass balustrade remains in place, the mounting block is...