TL3010 - TL3030 SYSTEMS FOR FRAMELESS ALL-GLASS BALUSTRADES
14Pages

TL3010 - TL3030 SYSTEMS FOR FRAMELESS ALL-GLASS BALUSTRADES

Your Choice. Our Power. The TL-3010 F-profile – one of the most powerful products in the 1.0 kN application range. The model is very well suited for balconies and terraces – it enables an especially small edge distance and therefore gains valuable additional space on the deck itself. Moreover, this system is ideally suited for new installations under screed. Of course, the relevant distances between drill holes have been taken into account. Essential Features | Slimline, elegant design and low-maintenance | ONLEVEL FLEXFIT Glass Adjustment Tool | Drainage holes | For glass thicknesses...

Small edge distance Ideally suited for installations under screed and on the facade

TL-3010 | 1.0 KN TOP MOUNT Glass profile | Sales unit: 1 piece Mill finish Plain aluminium | Side length inside: 60 mm | Side length outside: 200 mm | Sales unit: 1 piece Mill finish Outside corner 90° | Side length inside: 60 mm | Side length outside: 200 mm | Sales unit: 1 piece Mill finish Plain aluminium Spacer You do not have any drainage options on your balcony?! So that you do not need to install a dam on your balcony, you can simply mount the spacers beneath your profile. | Inner drill hole: Ø 14 mm | Sales unit: 7 pieces Mill finish Plain aluminium

TL-3010 | 1.0 KN TOP MOUNT End cap, left | For use on the left | Sales unit: 1 piece Mill finish Plain aluminium End cap, right | For use on the right | Sales unit: 1 piece Mill finish Plain aluminium End cap, left staircase | For use on the left | can be cut to size | Sales unit: 1 piece Mill finish Plain aluminium End cap, right staircase | For use on the right | can be cut to size | Sales unit: 1 piece Mill finish Plain aluminium

Finish interior application: zinc-plated steel (inside) Finish exterior application: V4A (exterior) Required number per 2500 mm: 7 pieces M12 Sales unit: 20 pieces Fischer fixing anchor FAZ II 12/20 zinc-plated steel (inside) Finish interior application: zinc-plated steel (inside) Finish exterior application: V4A (exterior) Required number per 2500 mm: 7 pieces M12 x 50 mm Sales unit: 7 pieces zinc-plated steel (inside) Finish interior application: zinc-plated steel (inside) Required number per 2500 mm: 7 pieces M12 Sales unit: 7 pieces zinc-plated steel (inside) Art. no. 91.3010.800.81

Fine adjustment of glass panes For glass thicknesses between 12 - 21.52 mm Adjustment of up to 34 mm in relation to the vertical axis Pay attention to the right glass thickness! Glass thickness Wedge colour

Front Row. With the TL-3030 F-profile you sit in the front row. You have the best seat and the best view in the house. TL-3030 was designed to support highest loads and is suitable both for interior and exterior applications. It can withstand linear loads of more than 3.0 kN and is appropriate for glass thicknesses between 21.52 mm and 31.52 mm. It has an outstanding resilience and was kept as minimalistic as possible as far as the design is concerned. With TL-3030 you always hold the better cards. Essential Features | Slimline, elegant design and low-maintenance | ONLEVEL FLEXFIT Glass...

Small edge distance Distance between anchors: 300 mm Top mount Ideally suited for installations under screed and on the facade

TL-3030 | 3.0 KN TOP MOUNT Glass profile | Height: 120 mm | Width 200 mm | Sales unit: 1 piece Plain aluminium Inside corner 90° | Side length inside: 50 mm | Side length outside: 250 mm | Sales unit: 1 piece Outside corner 90° | Side length inside: 50 mm | Side length outside: 250 mm | Sales unit: 1 piece End cap, left | For use on the left | Sales unit: 1 piece Plain aluminium

TL-3030 | 3.0 KN TOP MOUNT End cap, right | For use on the right | Sales unit: 1 piece Plain aluminium Finish interior application: zinc-plated steel (inside) Finish exterior application: V4A (exterior) Required number per 2500 mm: 9 pieces M16 Fischer fixing anchor FAZ II 16/25 zinc-plated steel (inside) Sales unit: Sales unit: Finish interior application: zinc-plated steel (inside) Finish exterior application: V4A (exterior) Required number per 2500 mm: 9 pieces M12 x 50 mm Sales unit: 9 piece zinc-plated steel (inside) Finish interior application: zinc-plated steel (inside) Required...

Fine adjustment of glass panes For glass thicknesses between 21.52 - 31.52 mm Adjustment of up to 34 mm in relation to the vertical axis Pay attention to the right glass thickness! Glass thickness Wedge colour

EXTENSION PIN. The Extension of Elements. Here ONLEVEL offers the perfect solution for a seamless connection between elements. And of course, we always remain faithful to our philosophy: An easier installation is impossible. The extension pin is made of high quality V4A steel and is thus suitable both for interior and exterior applications. Pay attention to the logo indicating the suitable application types. Extension pin for the maximum length of your balustrade