Above, t3 seat in bright white with end armrests. Formed aluminium body with powder coated finish on brushed 316 grade stainless steel feet. Backrest in brushed 316 grade stainless steel. (551 mm with armrests), height Stainless steel armrests. Backrest leaning rail. street furniture designers and manufacturers omos

t3 Fixing Instructions (for areas already paved) 1 Insert the stainless steel M10 threaded bar provided into each of the four feet and screw to a depth of approximately 10mm. 2 Determine the location for the seat. Remove the pavers and excavate two holes at centres 1687mm. 2 Fill the holes with 35N20 concrete up to 15mm below the level of the underside of the pavers ensuring a good smooth surface finish. 3 Allow sufficient time for the concrete to set then apply a layer of dry sand/cement mix over the pad. Compact and adjust to bring this to the level of the underside of the paving. 4 Replace...

t3 Care and Maintenance Guidelines The t3 seat is constructed from powder coated formed aluminium with brushed 316 grade stainless steel components. The materials have been selected for their excellent outdoor durability as well as their aesthetic properties. Some care is required to maintain the product’s original appearance. The extent to which maintenance is required will depend on a number of factors including environmental conditions, construction activity and level of use. Maintaining the painted aluminium The t3 seat is finished in polyester powder, a plastic coating which is baked onto...