Above and right, s72 litterbin with micro porous stain to wood. description Galvanized steel frame clad with iroko boards, elevated on steel post with stainless steel top rim. Galvanized steel liner. dimensions Height 528mm, width 446mm, depth 446mm. Capacity 50L. Weight 43Kg. options Root fixed or flange fixed. Unfinished timber or micro porous stain. street furniture designers and manufacturers

s72 AGFF Fixing Instructions (for areas already paved) 1 Determine the location for the bin. Remove the pavers and excavate a hole to minimum dimensions of L400 x W400 x D500mm. The size of the foundations may vary depending on the ground conditions. 2 Fill the holes with 35N20 concrete up to 15mm below the level of the underside of the pavers ensuring a good smooth surface finish. 3 Allow sufficient time for the concrete to set then apply a layer of dry sand/cement mix over the pad. Compact and adjust to bring this to the level of the underside of the paving. 4 Replace the paving slabs and ensure...

s72 RF Fixing Instructions (for areas already paved) 1 Determine the location for the bin. Remove pavers and excavate a hole L400 x W400 x D500mm. The size of the foundations may vary depending on the ground conditions. 2 Place the bin into the hole and position at the correct height above ground level. Ensure the bin is plumb then prop securely. 3 Back fill hole with concrete (35N20) leaving sufficient depth for paving slabs and bedding. 4 Once set remove props. 5 Where necessary cut the paving slabs and reinstate ensuring that they are well bedded in. 6 Render neatly around leg tubes with non...

s72 Care and Maintenance Guidelines The s72 litterbin is constructed from galvanized steel and iroko hardwood with a stainless steel top rim.The timber components have had a micro porous woodstain factory applied as a means of preserving the rich colour of the timber and maximising longevity. Some care is required to maintain the product’s original appearance. The extent to which maintenance is required will depend on a number of factors including environmental conditions, construction activity and level of use. Maintaining the stainless steel top rim Prior to shipping all our stainless steel...

Wood Finishes Below shows Iroko timber with factory applied micro-porous stain. This finish offers very good resistance to UV rays and provided the coating surface does not become broken the colour will not fade for several years. The coating is however vulnerable to conditions where high moisture and severe cold persist. Such conditions can cause the coating to blister and lift. Where maintenance is required the surface can be re-coated using a brush on version of the coating. Omos provide maintenance instructions for all products. Below shows Iroko timber untreated and freshly sanded. The inset...