description Cut stone ends and seat surface with stainless steel sub-frame. dimensions Length 3000mm, width 600mm, height 460mm. options Choice of granite or limestone. Choice of finish; polished, flamed or bush hammered. Continuous surface slab or broken with stainless steel ‘anti-skate’ bars. street furniture designers and manufacturers

s66 Fixing Instructions (for areas already paved, note: fixing is optional) 1 Determine the location for the bench. Remove the pavers and excavate two holes at centres 1750mm to minimum dimensions of L600 x W600 x D400mm. The size of the foundations may vary depending on the ground conditions. 2 Fill the holes with 35N20 concrete up to 15mm below the level of the underside of the pavers ensuring a good smooth surface finish. 3 Allow sufficient time for the concrete to set and then apply a layer of dry sand/cement mix over the pad. Compact and adjust this to the level of the underside of the paving....

s66 Care and Maintenance Guidelines The s66 bench is constructed from cut stone (granite or Kilkenny blue limestone) with a stainless steel frame. The materials have been selected for their excellent outdoor durability as well as their aesthetic properties. Some care is required to maintain the product’s original appearance. The extent to which maintenance is required will depend on a number of factors including environmental conditions, construction activity and level of use. Maintaining the stainless steel frame Prior to shipping all our stainless steel has been passivated to ASTM A380 and...

Each of the pieces shown above are Granite ref. G603, also referred to as Light Grey. The finishes are as follows: 1 Polished A polished finish gives the stone reflective properties. When viewed straight on, with no reflections, it appears slightly darker than the other finishes. 2 Flamed A flamed finish has a lightly textured surface. As the name suggests it is achieved by passing a flame across the surface causing the surface to flake leaving a random textured finish. 3 Bush Hammered Like the flamed finish a bush hammered finish is also textured though it is courser. The finish is achieved...