Above, grey painted panels with silver decal and silver painted centre frame. Right, recycling and general waste s16 litterbins, painted green and grey respectively with white decal. description 3 and 4mm s355 steel hot dipped galvanized throughout, powder coated finish on panels. Omos patented ashtray. Front opening with concealed stainless steel hinge and slam latch. options Painted centre frame. Galvanized or plastic liner. Choice of colours. Choice of decal. 386 191 (aperture height) 446 (aperture width) dimensions Height 1172mm, width 550mm, depth 386mm. Capacity 115L. Weight 85Kg. street furniture designers and manufacturers

s16 Fixing Instructions (for areas already paved) 1 Determine the location for the bin. Remove pavers and excavate a hole to minimum dimensions of L600 x W600 x D400mm. The size of the foundation may vary depending on the ground conditions. 2 Fill the hole with 35N20 concrete up to 15mm below the level of the underside of the pavers ensuring a good smooth surface finish. 3 Allow sufficient time for the concrete to set then apply a layer of dry sand/cement mix over the pad. Compact and adjust to bring this to the level of the underside of the paving. 4 Replace the paving slabs and ensure that...

s16 Care and Maintenance Guidelines The s16 litterbin is constructed from s355 galvanized steel, a material which is highly corrosion resistant. Despite the material’s corrosion resistant properties some care is required to maintain a bright appearance. The extent to which cleaning is required will depend on a number of factors including environmental conditions, construction activity and level of use. Maintaining the painted galvanized steel The s16 is finished in polyester powder, a plastic coating which is baked onto the components prior to assembly. This is a highly durable finish which will...