s16 dual recycling
1 / 3Pages

Catalog excerpts

s16 dual recycling - 1

191 (aperture height) 446 (aperture width) Above top, general waste and paper recycling s16 in grey with restricted blue slotted aperture. Above, general waste and recycling s16 in grey with restricted green circular aperture. Right, recycling and general waste s16 bins, painted green and grey respectively. description 3 and 4mm s355 steel hot dipped galvanized throughout, powder coated finish on panels. Front opening with concealed stainless steel hinge and slam latch. dimensions Height 1172mm, width 1160mm, depth 386mm. Capacity 115L. Weight 85Kg. options Painted centre frame. Galvanized or plastic liner. Custom restricted aperture. Choice of colours. Choice of decal. street furniture designers and manufacturers

Open the catalog to page 1
s16 dual recycling - 2

(for areas already paved) 1 Determine the location for the dual bin. Remove pavers and excavate a hole to minimum dimensions of L1200 x W600 x D400mm. The size of the foundation may vary depending on the ground conditions. 1172 2 Fill the hole with 35N20 concrete up to 15mm below the level of the underside of the pavers ensuring a good smooth surface finish. 3 Allow sufficient time for the concrete to set then apply a layer of dry sand/cement mix over the pad. Compact and adjust to bring this to the level of the underside of the paving. 4 Replace the paving slabs and ensure that they are...

Open the catalog to page 2
s16 dual recycling - 3

s16 Care and Maintenance Guidelines The s16 dual recycling bin is constructed from s355 galvanized steel, a material which is highly corrosion resistant. Despite the material’s corrosion resistant properties some care is required to maintain a bright appearance. The extent to which cleaning is required will depend on a number of factors including environmental conditions, construction activity and level of use. Maintaining the painted galvanized steel The s16 is finished in polyester powder, a plastic coating which is baked onto the components prior to assembly. This is a highly durable...

Open the catalog to page 3

All Omos Ltd. catalogs and technical brochures

  1. t3 seat

    3 Pages

  2. s83 bench

    5 Pages

  3. s66 bench

    4 Pages

  4. s64 bench

    4 Pages

  5. s56 bench

    5 Pages

  6. s30.2 bench

    6 Pages

  7. s22 bench

    3 Pages

  8. s19ms bench

    4 Pages

  9. s06 bench

    3 Pages