Catalogs >
Omos Ltd. >
s11.3 litter bin

s11.3 litter bin
3Pages

Catalog excerpts

Above, wide aperture version. Right, chamfer aperture version. dimensions Height 1070mm, width 530mm, depth 400mm. Capacity 90L. Weight 62Kg. options Galvanized or plastic liner. Choice of decal. Wide or chamfer aperture. 141 (aperture height) 223 (aperture width) description 316 grade stainless steel with satin finish outer construction on level adjustment galvanized base. Omos patented ashtray. Front opening with concealed stainless steel hinge and slam latch. 90L liner. street furniture designers and manufacturers

Open the catalog to page 1

s11.3 Fixing Instructions (for areas already paved) 1 Determine the location for the bin. Remove pavers and excavate a hole to minimum dimensions of L600 x W600 x D400mm. The size of the foundation may vary depending on the ground conditions. Foundations must be to Engineer’s specification. 2 Fill the hole with 35N20 concrete up to 15mm below the level of the underside of the pavers ensuring a good smooth surface finish. 3 Allow sufficient time for the concrete to set then apply a layer of dry sand/cement mix over the pad. Compact and adjust to bring this to the level of the underside of...

Open the catalog to page 2

s11.3 Care and Maintenance Guidelines The s11.3 litterbin is constructed from 316 grade stainless steel with a heavy duty galvanized steel base, materials which are highly corrosion resistant. The external finish of the bin is a satin or brushed polish. Despite the material’s corrosion resistant properties some care is required to maintain a bright appearance. The extent to which cleaning is required will depend on a number of factors including environmental conditions, construction activity and level of use. Maintaining the stainless steel Prior to shipping all our stainless steel has been...

Open the catalog to page 3

s11.3 litter bin 3Pages

Catalog excerpts

All Omos Ltd. catalogs and technical brochures

s11.3 litter bin
3Pages