WIND & SOLAR POWER
WIND & SOLAR POWER
OMNILED is an autonomous smart lighting system powered by wind and solar energy, designed to provide IoT services. It features a unique aerodynamic design that allows continuous operation in urban environments. The system includes PV cells and a vertical axis turbine to harness energy, which is stored in a battery bank for various services accessible via a web-based platform.
- Smart lighting with adaptive illumination up to 20 meters in diameter.
- Public Wi-Fi hotspot and charging station.
- Video analytics for surveillance, smart parking, and location analytics.
- Web-based monitor and control platform.
- Built-in weather station (under development).
- Dimensions: Diameter 1.20 m, Height 0.30 m.
- Generator: Direct drive ironless start permanent magnet.
- Wind Power: 100 W rated at 11 m/s.
- Solar Power: 60 W peak, with an additional 60 Wp solar panel available.
- Battery: 500 Wh C10 Lead Crystal, with an additional 1000 Wh battery available.
- Pole Height: 6 m or 8 m.
- Lighting Power: 30 W or 45 W, with luminance of 5100 lm or 6800 lm.
- Color Temperature: 4000 K or 6000 K.
- Optional features include a web-based remote monitor and control, Wi-Fi router, IP camera, and grid-backup.
The system is designed for energy efficiency, with lean controller electronics to maximize energy availability for IoT features. It can operate as an uninterruptible power supply, providing grid stability and backup power.
Catalog excerpts
WIND & SOLAR POWER WWW.OMNIFLOW.PT
Open the catalog to page 1
OMNILED SOLAR PV CELLS OMNIDIRECTIONAL DIFFUSER VERTICAL AXIS TURBINE
Open the catalog to page 2
FULLY AUTONOMOUS SMART LIGHTING SYSTEM OMNILED is an autonomous smart lighting system fully powered by sun and wind energy. It turns renewable energy into autonomous IoT services. Its unique design blends advanced aerodynamics with a simple geometry allowing continuous operation even in urban scenarios. PV cells cover the top surface of the design-patented shroud, while its distinctive geometry based on an inverted wing shaped airfoil directs the free wind stream from any direction to a diffuser hence promoting a speed up effect into a central wind turbine. Sourced energy is stored in a shroud-enclosed...
Open the catalog to page 3
OMNILED typical installation over an 8 m pole can adaptively illuminate its surrounding up to 20 m in diameter. It is equipped with a motion sensor that combined with the systems’ controller, can autonomously set into saving mode when activated by nearby movement hence extending LED and batteries’ life. Energy efficiency plays a major role in our product development hence all OMNILED built-in controller electronics have been designed to be as lean as possible, leaving the majority of the energy for the additional layer of IoT features. Since grid connection is optional, the equipment can be used...
Open the catalog to page 4
Technical Data Omniled 07 Generator Direct drive ironless start permanent magnet DIFFUSER Single-element patented shroud DC CONTROLLER Hybrid wind/solar regulator WIND POWER [W] 100 (rated @11 m/s, steady) SOLAR POWER [W] 60 (peak) 1 2 BATTERY 500 Wh C10 Lead Crystal 3 OPTIONAL Web based remote monitor and control (OMNIconnect) Wi-Fi router IP Camera Grid-backup Additional 60 Wp solar panel available Additional 1000 Wh battery available RUA DELFIM FERREIRA, 776C 4100-199 PORTO PORTUGAL [email protected] TEL: (+351) 223 219 239
Open the catalog to page 5All OMNIFLOW catalogs and technical brochures
SMART IoT PLATFORM3 Pages
OMNILED 072 Pages
OMNI CHARGER EV STATION2 Pages
OMNI BIKE2 Pages
OMNI DOCKING STATION2 Pages
OMNI BENCH2 Pages
- Public bench
- Contemporary public bench
- Commercial public bench
- Metal lamp post
- Industrial lamp post
- LED street light
- Contemporary street light
- Sustainable public bench
- Single street light
- Modular public bench
- Public building public bench
- IP65 street light
- School public bench
- Airport public bench
- Museum public bench
- Composite public bench
- Terminal public bench
- Hotel public bench
- Shop public bench