Installation instructions Centre - pivot windows
Installation instructions Centre - pivot windows
Product Overview and Manufacturer Information
The document relates to OKPOL® products, manufactured by OKPOL Sp. z o.o., located at ul. Topolowa 24, 49-318 Skarbimierz-Osiedle. Contact emails include [email protected] and [email protected]. The manufacturer disclaims liability for non-compliance with safety, legal, and construction regulations by owners, users, installers, or architects.
Technical Specifications and Dimensional Parameters
The document provides detailed dimensional ranges and parameters for various product components, identified by codes such as H, U, P, L, LH, and others. Key measurements include:
- Angle range: minimum 15º to maximum 90º
- Minimum height: 110 cm
- Dimensional ranges (in millimeters):
| Parameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| a | 30 | 60 |
| b | 15 | 25 |
| c | 60 | 150 |
| d | 90 | 110 |
Additional dimensional variants show minimum and maximum values for parameters a, b, c, and d depending on product type.
Product Types and Codes
The document references multiple product types and codes such as H, U, P, L, LH, AKP, and others, each associated with specific dimensional limits and installation parameters. For example:
- U = 16 cm
- H = 21 cm
- Various codes like 1H/U, 3H/U, 16H/U, 17H/U, etc., indicating product variants.
Installation and Usage Guidelines
Installation parameters include minimum spacing and clearance values, such as:
- Minimum spacing a = 30 mm, maximum 60 mm
- Clearance b between 15 and 25 mm
- Height and width clearances with specific maximum values (e.g., max 90 m, max 50 m in some contexts)
Angles for installation range from 15º to 90º, with a minimum slope of 3º indicated for some product types.
Safety and Compliance Notes
The manufacturer emphasizes that compliance with safety requirements, legal regulations, and construction laws is the responsibility of the owner, user, installer, and architect. The company will not be liable for failures in this regard.
Summary of Key Parameters
- Angle range: 15º to 90º
- Minimum height: 110 cm
- Dimensional parameters a, b, c, d with specified ranges depending on product type
- Product codes correspond to specific dimensional and installation requirements
- Installation clearances and spacing must be respected
- Manufacturer liability disclaimer regarding safety and legal compliance
Catalog excerpts
OKPOL Sp. z o.o. ul. Topolowa 24 49-318 Skarbimierz-Osiedle e-mail: [email protected] e-mail: [email protected] Producent zastrzega, iż nie będzie ponosić żadnej odpowiedzialności za nieprzestrzeganie wymogów bezpieczeństwa oraz przepisów prawa jak również prawa budowlanego przez właściciela, użytkownika, montażystę oraz architekta. The manufacturer reserves that it will not incur any liability for failure to comply with safety requirements and laws as well as construction law by the owner, operator, fitter and architect.
Open the catalog to page 16All Okpol catalogs and technical brochures
FLAT ROOF WINDOWS15 Pages
Product catalogue 201560 Pages
Archived catalogs
- Fabric blinds
- Industrial roller blind
- Motorized blinds
- Solar protection blinds
- Commercial blinds
- Outdoor blinds
- Blackout blinds
- Window profile
- Metal blinds
- Canvas blinds
- Insect screen
- Thermal break window profile
- Roof window
- Electric blinds
- Window screen
- Double-glazed roof window
- Hand-cranked blinds
- Roof window blinds
- PVC window profile
- Industrial flashing