OKALUX Light Diffusing Insulating Glass
5Pages

{{requestButtons}}

Catalog excerpts

OKALUX Light Diffusing Insulating Glass - 1

INFOTEXT OKALUX Light Diffusing Insulating Glass The challenge for OKALUX Light Diffusing Insulating Glass: to make daylight useful. With the use of a translucent light diffusing capillary slab both sides covered with additional glass fibre tissues in the cavity, OKALUX achieves • optimum, uniform light transmittance into the room, irrespective of irradiation conditions • light transmission and total solar energy transmittance as required • very good colour rendering index • good heat insulation • UV protection as required • sound insulation as required • vision protection and glare protection • attractive appearance in daylight and in artificial light • bird friendly glaszing Physical properties Thermal insulation The capillaries reduce the heat transfer in the cavity between panes in terms of convection and heat radiation. The thicker the OKAPANE insert, therefore, the better the Ug value. For OKAPANE thicknesses of 24 mm and over, we recommend the use of our OKALUX EVO product, which enables Ug values of ≥ 1.3 W/(m²K) to be achieved. With the triple pane make (OKALUX K product variant) it is possible to achieve Ug values of ≥ 0.8 W/(m2K). The Ug value of insulating glass in accordance with DIN EN 673 or DIN EN 674 always relates to vertical installation. If the insulating glass is at an angle, e.g. as in roof glazing, the Ug value increases, because the rising convection level in the cavity. Insulating glass with a standard value of Ug = 1.1 W/(m²K) has an actual value of approx. 1.7 W/(m²K) if used for horizontal roof glazing. The capillary slab in the cavity between panes prevents convection, which means that the Ug value of OKALUX is constant whatever the installation position. For roof glazing, OKALUX glass with a 24 mm capillary slab achieves the same Ug value as insulating glass with a Ug of 1.1 W/(m²K).

Open the catalog to page 1
OKALUX Light Diffusing Insulating Glass - 2

2,2 2,0 1,8 1,6 1,4 1,2 1,0 Air 16 mm Argon 16 mm Krypton 10 mm OKALUX 24 mm OKALUX K OKALUX+ OKALUX EVO 40 mm Sound insulation Capillary slabs decouple the panes of the insulating glazing and provide improved sound insulation. Spectral properties The special light diffusing properties of the OKAPANE insert provide an optimised, uniform distribution of light in the room, regardless of irradiation conditions. The special geometry of the “OKAPANE” capillary material results in improved heat insulation with an increased thickness, but without any notable reduction in light transmission. The g...

Open the catalog to page 2
OKALUX Light Diffusing Insulating Glass - 3

INFOTEXT Table 1. Spectral properties Table 2. Ug value and Rw value Capillary slab [mm] Ug [W/(m²K)] Ug [Btu/(hr ft² °F)] Rw [dB] Legend and related values: unit standard Ug W/(m2K) DIN EN 673 DIN EN 674 TSET % DIN EN 410 Tv % DIN EN 410 Rw FC SC technical term Thermal transmittance Total solar energy transmittance or solar heat gain coefficient Light transmission (direct/hemispheric resp. diffuse/ hemispheric) Sound reduction coefficient Reduction factor of a solar control system, FC=TSET/TSETreference Shading coefficient, SC=TSET/0.86 The above data are approximate data. They are based...

Open the catalog to page 3
OKALUX Light Diffusing Insulating Glass - 4

INFOTEXT Make-up What makes OKALUX light diffusing insulating glass so special is the capillary slab inserted in the cavity between the panes. The glass type and thickness vary according to static requirements and design requirements. Standard make-up: Outer pane additional glass fibre tissues Capillary slab 8 - 24 mm additional glass fibre tissues Inner pane Variations in the density of the capillary slab and the diameters of the capillaries may be visible, as can joints which are necessary for production reasons. Under certain light conditions it may also be possible that fine lines, also...

Open the catalog to page 4
OKALUX Light Diffusing Insulating Glass - 5

We take architectural glass a step ahead. Installation instructions OKALUX light diffusing insulating glass is used for glazing like normal insulating glass. For instructions and recommendations for the installation of our insulating glazing, please refer to our information and instructions for customers contained in "Delivery of OKALUX Glass Products" and "General Information on Glazing". Other printed matter If you do not have the following printer matter, please request it directly from OKALUX or download it from the Internet at www.okalux.com: General terms and conditions of business...

Open the catalog to page 5

All OKALUX Glastechnik GmbH catalogs and technical brochures

  1. OKALUX+

    5 Pages

  2. KAPILUX TWD

    6 Pages

  3. OKATHERM

    4 Pages

  4. OKALUX EVO

    5 Pages