EXTRAPAINT TECHNICAL DATA SHEET
3Pages

Technical Data Sheet INT/ex/02/en TECHNICAL DATA SHEET EXTRAPAINT Technical Qualities EXTRAPAINT is a very washable, acrylic paint, for exterior and interior use, characterized by high coverage, excellent vapour permeability, water repellence and a finish that is smooth, matt and soft to the touch. Formulated with acrylic resins in water dispersion, pigments and fillers, it is indicated on normal plasters, either new or old, gypsum plasters, already painted walls (even with strong colours). It can also be applied in exterior. It is has a low level of odour, is non-inflammable and is friendly to both humans and the environment. Ideal Use Interior and exterior walls. Surface Preparation Clean the surface, removing any loose material. For crumbly or very absorbent substrates, apply the recommended acrylic fixative CRILUX or NEOFIX by OIKOS. In order to increase the coverage of the cycle use as primer IL PIGMENTATO by OIKOS. On walls that are in good condition, the product can be applied without using a primer. Wait at least 6 hours before painting Application Method New wall, civil plaster: apply two coats of EXTRAPAINT diluted 50% with drinkable water. New wall, gypsum plaster: apply two coats of Extrapaint, the first diluted 70%, the second 50% with drinkable water. Already painted wall, light and pastel colours: apply one or two coats of EXTRAPAINT according to the condition of the surface, diluted 50% with drinkable water. Walls already painted with strong colours: apply two coats of EXTRAPAINT diluted 50% with drinkable water. Technical Characteristics: Application Dilution: 50%-70% with drinkable water according to the surface. New wall, civil plaster: 8-10 m2/l in two coats; New wall, gypsum plaster: 10-12 m2/l in to coats; Walls that are already painted with strong colours: 9-11 m2/l in two coats;

Technical Data Sheet INT/ex/02/en INTERIOR

Technical Data Sheet INT/ex/02/en cycles, in this case over 40,000 hits of brush. Emission limits of Volatile Organic Compounds (VOC) according to directive 2004/42/CE: Classification: A/a ; VOC: 1 8g/l (max); Limit Phase I (from 1.1.2007), 75 g/l Limit Phase II (from 1.1.201 0): 30 g/l White + colours colour chart from DCS Decor Color System by OIKOS. Toxicological Data The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous...