Centrifugal fans to extract air directly outside or through ducting; Suitable for wall/ceiling mounting; Backdraught shutter to prevent ingress of air and foul odours; For ducts between Ø100mm and 150mm; Base, Timer, HT, Sensor, 12V model options; Simple to remove the washable filter; Central air outlet; • Double insulated product, without ground wire for fast connection; • Made of ABS material; • Adjustable speed through RGE or RG 5 optional controllers (base version only); • IPX4 protected (EN 60529); • In accordance with Standard EN 60335-2-80. POSITIONING - Wall mounting - Duct mounting - Ceiling mounting TECHNICAL DATA Model Flow rate SILENTE Sensor FURTHER INFORMATION • Timer version: Turn-off delay adjustable from 2 to 25 minutes; • Silente HT version: The fan automatically starts when the humidity in the room is higher than the preset value, adjustable from 40% to 90%; • Sensor version: The fan automatically starts when the sensor detects a presence in the room. When the room is vacated the fan will continue to run FOR ALL MODELS... Supplied with washable filter assuring long life of the motor and high protection to the impeller; • Elastomer gasket suitable for uneven surfaces for trouble free installation; according to the preset value on timer; • 12 Volt version - In addition to the technical and functional features of the basic model it is manufactured with a very low power voltage (SELV, see page 24). • Quick installation as all components are clicked together; • The reduced size of the exit spigot allows to install the unit into ducting with curves placed

washable filter Anti-vibration gasket made of elastomer FLOW CHARTS Controller SILENTE