EB EX-ATEX

Product catalog summary

Overview: The document provides technical specifications and application details for EB EX-ATEX explosion-proof axial fans, designed for environments with high explosion risks. These fans comply with the ATEX Directive 84/9/EEC and are certified by the CESI Institute.

Specifications:

Certified for use in commercial and industrial environments with explosive atmospheres containing gas, vapors, or inflammable steam.
Certified by CESI Institute with certificate CESI n°3 ATEX 251.
Fan group II, category 2 for gases, construction safety C, with a maximum surface temperature of T4 (135°C), with options for T5 and T6.
Suitable for wall mounting in various applications such as shops, workshops, sports facilities, supermarkets, warehouses, factories, and machinery.
Classified for zones 1 and 2, requiring specific safety tests and examinations.
Constructed with a steel-plated body and epoxy-based anticorrosive paint, with an impeller made of VO reinforced conductive nylon.
Exd-II B - T4, ball bearing class F insulation motor, IP55 protected.
Maximum temperature of extracted air: 40°C.
Reversible models available.
Reference standards include EN 13463-1, EN 13463-5, and EN 14986.

Technical Data:

Model specifications include motor type, number of poles, revolutions per minute, voltage, frequency, flow rate, maximum pressure, power, nominal current, noisiness, and weight.
Dimensions for each model are provided, detailing measurements A through H.

Flow Charts: Flow rate and pressure charts are provided for models EB 25 4M-T EX-ATEX, EB 30 4M-T EX-ATEX, EB 35 4M-T EX-ATEX, EB 50 4M-T EX-ATEX, and EB 340 4M-T EX-ATEX.

Accessories: Accessories suitable for installation outside of the EX ATEX area are mentioned, including controllers, protection grilles, and gravity shutters. Further details are available on page 85.

Catalog excerpts

EB EX-ATEX ANTIDEFLAGRANTI EX-ATEX Explosion Proof Certiﬁed Axial fans to extract air and fumes directly outside through short ducting, wall or panel mounting, in compliance with ATEX Directive 84/9/EEC effective from July 1st 2003 in EU. • Suitable for applications in commercial and industrial environments where the risk of explosion is high and where the surrounding atmosphere contains gas, vapours or highly inﬂammable steam; • The whole product and not just the electrical parts, has been certiﬁed by CESI Institute with CESI n°3 ATEX 251 certiﬁcate; • Fan group II, cat. 2 for gases, construction safety C, max surface temp. T4 (135°C) available on demand T5 and/or T6; • Classiﬁed for zones 1 and 2; • This approval has required speciﬁc safety tests and proper examinations on products to verify how the adopted solutions have satisﬁed the essential Directive requirements; • Steel plated body protected by an epoxy-based anticorrosive paint; • Impeller made of VO reinforced conductive nylon; • Exd-II B - T4, ball bearing class F insulation motor IP55 protected; • Max temperature of extracted air: 40°C; • Reversibility: all models; • Reference Standards: EN 13463-1; EN 13463-5; EN 14986. POSITIONING - Wall mounting ENVIRONMENTS APPLICATION Suitable for Industrial, civil and commercial application where the risk of explosion is high. - Shops; - Workshops; - Sports facilities; - Supermarkets and shopping centers; - Warehouse; - Factories; - Machinery. TECHNICAL DATA Model Flow rate three phase three phase three phase three phase three phase

Open the catalog to page 1