AXIAL FAN • Axial fans to extract air directly outside or through short ducting also suitable for glass application with optional glass kit; • Low profile grille with operating indicator light; • Two fixing screws and click assembly of the grille for easy installation; • Double insulated product, without ground wire for fast connection; • For ducts Ø 92-100-125-150 mm; • Base, Timer, HT, PIR, 12V model options; • Reduced internal wall dimensions to allow installation where the bend of ducting is close to the outlet of the product; • A version: internal, silent automatic shutter; • BB versione: ball bearing motor; • SELV 12V version: working at12V AC, installation within the safety zones 1 and 2; • IPX4 protected (EN 60529), 45°C working temperature; • In accordance with Standard EN 60335-2-80. POSITIONING - Wall mounting - Ceiling mounting - Glass mounting (eccept IN 9/3,5”) TECHNICAL DATA Model Flow rate IN 10/4” SELV 12V Pull cord

Flow rate FURTHER INFORMATION... IN • Timer version: Turn-off delay adjustable from 2 to 25 minutes; • HT version: The fan automatically starts when the humidity in the room is higher than the preset value, adjustable from 40% to 90%; • PIR version: The fan automatically starts when the sensor detects a presence in the room. When the room is vacated the fan will continue to run according to the preset value on timer; • Careful selection of materials: grille in ABS and body in polypropylene talc filled; • Performance tests in accordance with Standard UNI 10531, noise tests in accordance with Standard...